Management Access SONIC-DEPLOY Practice Questions (Page 2)

Questions 6–8

1. 6foundation · easy

   A network engineer needs to configure out-of-band management access on a Dell SONiC switch. Which interface is the standard, dedicated logical interface used for this purpose?

   • ALoopback interface (Loopback0)
   • BPhysical data port (Ethernet1/1)
   • CManagement interface (eth0)
   • DVLAN interface (Vlan100)
   Reveal Solution Discussion Select an answer first
2. 7expert · hard

   A network team is deploying Dell SONiC switches in a multi-tenant environment. Each tenant has its own management VLAN, and the switches must be managed in-band. The management team wants to ensure that management traffic for each tenant is isolated. The switches have a dedicated management port (eth0) that is connected to a shared out-of-band management network. The team wants to use the dedicated management port for all switches to simplify management. However, the security policy requires that tenant management traffic be isolated. What is the most appropriate solution?

   • AConfigure a separate management VLAN for each tenant on the front-panel ports and use in-band management.
   • BUse the dedicated management port (eth0) with a different IP for each tenant, but this is not possible on a single switch.
   • CUse the dedicated management port (eth0) for all switches and rely on the out-of-band network's isolation.
   • DConfigure the dedicated management port (eth0) in a management VRF and use in-band SVIs for each tenant.
   Reveal Solution Discussion Select an answer first
3. 8application · medium

   A network administrator is configuring a Dell SONiC switch and needs to ensure that the management interface (eth0) is reachable from the production network. The production network uses VLAN 200 with subnet 10.0.20.0/24. The management port is connected to a separate management network on 192.168.10.0/24. The administrator wants to allow SSH access to the switch from the production network. What is the most appropriate configuration?

   • AConfigure a static route on the switch to reach 10.0.20.0/24 via the management gateway.
   • BUse the management interface (eth0) with IP 192.168.10.2/24 and configure a default route to the production network.
   • CConfigure the management interface with an IP in the production subnet (10.0.20.0/24).
   • DConfigure an in-band management SVI on VLAN 200 with IP 10.0.20.2/24 and enable SSH.
   Reveal Solution Discussion Select an answer first