An OSPF network has two paths to a destination network. Path A traverses a 1 Gbps link and then a 100 Mbps link. Path B traverses a 10 Gbps link and then a 1 Gbps link. The reference bandwidth is set to 100 Gbps. Which path will OSPF prefer?

Path B, because it has a lower total cost.

Path A, because it has a lower total cost.

Path A, because it has a higher minimum bandwidth.

Both paths will be used for load balancing.

Which packet type is used by OSPF to request specific LSAs from a neighbor during database synchronization?

Link-State Acknowledgment (LSAck) packet

Database Description (DD) packet

Link-State Request (LSR) packet

An OSPF router has three routes to the same destination network 192.168.10.0/24. Route 1 is an intra-area route with a cost of 50. Route 2 is an inter-area route with a cost of 30. Route 3 is an external route (Type 5 LSA) with a cost of 20. Which route will be installed in the routing table?

Route 1, because intra-area routes are always preferred over inter-area and external routes.

Route 1 and Route 2 will be installed, and Route 3 will be ignored.

Route 2, because it has a lower cost than Route 1.

Route 3, because it has the lowest cost.

Dell PowerSwitch Data Center Deploy

Domain 4Objective 1

Describe the Components of OSPF POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 3)

Part of the IP Routing domain, which accounts for 20% of the POWERSWITCH-DATA-CENTER-DEPLOY exam.

25questions here

5free pages

10concepts

20%of the exam

Questions 11–15

11application · medium
An OSPF network has two paths to a destination network. Path A traverses a 1 Gbps link and then a 100 Mbps link. Path B traverses a 10 Gbps link and then a 1 Gbps link. The reference bandwidth is set to 100 Gbps. Which path will OSPF prefer?
Select an answer first
12foundation · easy
In the OSPF neighbor state machine, which state indicates that a router has received a Hello packet from a neighbor but has not yet established two-way communication?
Select an answer first
13foundation · easy
Which OSPF LSA type is generated by an Area Border Router to advertise routes to networks in other areas?
Select an answer first
14foundation · easy
Which packet type is used by OSPF to request specific LSAs from a neighbor during database synchronization?
Select an answer first
15expert · medium
An OSPF router has three routes to the same destination network 192.168.10.0/24. Route 1 is an intra-area route with a cost of 50. Route 2 is an inter-area route with a cost of 30. Route 3 is an external route (Type 5 LSA) with a cost of 20. Which route will be installed in the routing table?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-DATA-CENTER-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-DATA-CENTER-DEPLOY” is a trademark of its owner, used for identification only.

Describe the Components of OSPF POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 3)

Questions 11–15

An OSPF network has two paths to a destination network. Path A traverses a 1 Gbps link and then a 100 Mbps link. Path B traverses a 10 Gbps link and then a 1 Gbps link. The reference bandwidth is set to 100 Gbps. Which path will OSPF prefer?

In the OSPF neighbor state machine, which state indicates that a router has received a Hello packet from a neighbor but has not yet established two-way communication?

Which OSPF LSA type is generated by an Area Border Router to advertise routes to networks in other areas?

Which packet type is used by OSPF to request specific LSAs from a neighbor during database synchronization?

An OSPF router has three routes to the same destination network 192.168.10.0/24. Route 1 is an intra-area route with a cost of 50. Route 2 is an inter-area route with a cost of 30. Route 3 is an external route (Type 5 LSA) with a cost of 20. Which route will be installed in the routing table?

Keep studying — IP Routing