Configure and Verify a Single Area of OSPF Topology POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 4)

Questions 16–19

1. 16application · medium

   A Dell PowerSwitch S5232F-ON has an OSPF neighbor that is stuck in INIT state. You verify that the interface is up and has an IP address. What is the most likely cause?

   • AThe area ID is mismatched
   • BThe router ID is duplicated
   • CThe OSPF process is not running
   • DThe neighbor's hello packets are not being received
   Reveal Solution Discussion Select an answer first
2. 17expert · medium

   A Dell PowerSwitch S5232F-ON has an OSPF neighbor that is stuck in EXCHANGE state. You verify that the MTU is the same on both interfaces. What is the most likely cause?

   • AThe master/slave negotiation is failing
   • BThe network type is mismatched
   • CThe dead interval is too short
   • DThe router ID is duplicated
   Reveal Solution Discussion Select an answer first
4. 18expert · medium

   Two Dell PowerSwitch S4148F-ON switches are connected via a Layer 3 port-channel. OSPF adjacency is not forming. 'show ip ospf interface port-channel 1' shows the interface is UP, network type is BROADCAST, and hello interval is 10 seconds. On the neighbor, the same command shows hello interval of 30 seconds. What is the most efficient fix?

   • AChange the hello interval on one switch to match the other
   • BIncrease the dead interval on both switches
   • CRestart the OSPF process on both switches
   • DChange the network type to point-to-point on both switches
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   A Dell PowerSwitch S5232F-ON has an OSPF adjacency that is in the 2-WAY state. You need to determine if this is normal or if there is a problem. What does the 2-WAY state indicate?

   • AThe routers have fully synchronized their link-state databases
   • BThe routers have exchanged hello packets but are not yet synchronized
   • CThe routers have a mismatch in OSPF parameters
   • DThe routers are exchanging database description packets
   Reveal Solution Discussion Select an answer first