An access layer switch receives a frame from a workstation. The frame's destination MAC address is not in the switch's MAC address table. The destination IP address is on a different VLAN than the source. What does the access switch do with the frame?

Send the frame only to the default gateway's MAC address

Route the frame to the destination VLAN using the IP routing table

Drop the frame because the destination is on a different VLAN

Flood the frame out all ports in the source VLAN except the receiving port

A campus network uses a Layer 3 distribution layer. A user in VLAN 10 needs to reach a server in VLAN 20. The user's access switch is connected to the distribution switch. Which statement best describes how the traffic is forwarded?

The core switch routes the packet because inter-VLAN routing must occur at the core.

The access switch routes the packet directly to the server using its IP routing table.

The access switch forwards the frame to the distribution switch, which routes the packet from VLAN 10 to VLAN 20 and forwards it toward the destination.

The distribution switch floods the packet out all ports to find the server.

A company wants to segment traffic between the engineering and HR departments. They plan to use VLANs and inter-VLAN routing. Where should the inter-VLAN routing be configured to minimize latency and reduce core layer load?

On a dedicated firewall between the VLANs

On the core layer switches only

On the distribution layer switches

Dell PowerSwitch Campus Deploy

Domain 1Objective 1

Explain the Typical End-To-End Data Flow of a Campus Network POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Part of the Networking Overview domain, which accounts for 10% of the POWERSWITCH-CAMPUS-DEPLOY exam.

29questions here

6free pages

8concepts

10%of the exam

Questions 6–10

6foundation · easy
Which mechanism is used by QoS to prioritize traffic on a switch?
Select an answer first
7foundation · easy
Which type of device is typically connected directly to an access layer switch?
Select an answer first
8application · medium
An access layer switch receives a frame from a workstation. The frame's destination MAC address is not in the switch's MAC address table. The destination IP address is on a different VLAN than the source. What does the access switch do with the frame?
Select an answer first
9application · medium
A campus network uses a Layer 3 distribution layer. A user in VLAN 10 needs to reach a server in VLAN 20. The user's access switch is connected to the distribution switch. Which statement best describes how the traffic is forwarded?
Select an answer first
10application · medium
A company wants to segment traffic between the engineering and HR departments. They plan to use VLANs and inter-VLAN routing. Where should the inter-VLAN routing be configured to minimize latency and reduce core layer load?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.

Explain the Typical End-To-End Data Flow of a Campus Network POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Questions 6–10

Which mechanism is used by QoS to prioritize traffic on a switch?

Which type of device is typically connected directly to an access layer switch?

An access layer switch receives a frame from a workstation. The frame's destination MAC address is not in the switch's MAC address table. The destination IP address is on a different VLAN than the source. What does the access switch do with the frame?

A campus network uses a Layer 3 distribution layer. A user in VLAN 10 needs to reach a server in VLAN 20. The user's access switch is connected to the distribution switch. Which statement best describes how the traffic is forwarded?

A company wants to segment traffic between the engineering and HR departments. They plan to use VLANs and inter-VLAN routing. Where should the inter-VLAN routing be configured to minimize latency and reduce core layer load?

Keep studying — Networking Overview