Dell PowerSwitch Campus Deploy
Domain 7Objective 1
Describe the Types and Functions of IPv6 Addresses POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 4)
Part of the IPv6 domain, which accounts for 10% of the POWERSWITCH-CAMPUS-DEPLOY exam.
25questions here
5free pages
6concepts
10%of the exam
Questions 16–20
- 16
What is the primary function of an IPv6 multicast address?
Select an answer first - 17
A network engineer is configuring IPv6 on a Dell PowerSwitch. The switch needs to communicate with other devices on the same VLAN, but the VLAN has no IPv6 default gateway. The engineer wants to ensure that the switch can still send and receive traffic on the local segment. Which address type should the engineer configure on the switch's VLAN interface?
Select an answer first - 18
A network engineer is configuring IPv6 on a Dell PowerSwitch. The switch needs to communicate with a legacy IPv4-only server at 10.0.0.5. The network is using a translation mechanism that requires the IPv6 address to embed the IPv4 address. The engineer wants to use the standard format for this. Which IPv6 address should the engineer use?
Select an answer first - 19
A network administrator is troubleshooting IPv6 connectivity on a Dell PowerSwitch. The switch can ping its directly connected neighbor using the neighbor's link-local address, but it cannot ping a host on a remote subnet. The remote subnet is reachable via a router that is up. What is the most likely reason for the failure?
Select an answer first - 20
Which type of IPv6 unicast address is automatically configured on every interface and is only valid on the local link?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.