During PoE power negotiation, what does the PSE do to determine the power class of a connected PD?

It assumes the PD requires the maximum power class by default.

It sends a series of voltage pulses and measures the resulting current to classify the PD.

It reads the PD's MAC address to look up its power requirements in a database.

It sends a DHCP request to the PD to query its power needs.

An admin is monitoring PoE on a Dell switch and notices that a port is in 'searching' state. What does this indicate, and what should the admin do?

The port has detected a PD but is not providing power due to a configuration issue.

The port is not connected to a PD, and the admin should check the cable.

The port is attempting to detect a PD, and the admin should wait for the detection to complete.

The port is in a power-saving mode, and the admin should disable it.

Dell PowerSwitch Campus Deploy

Domain 6Objective 2

Configure and Troubleshoot Power over Ethernet (PoE) POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Part of the Campus Services domain, which accounts for 20% of the POWERSWITCH-CAMPUS-DEPLOY exam.

11questions here

3free pages

5concepts

20%of the exam

Questions 6–10

6foundation · easy
Which CLI command on a Dell PowerSwitch displays the current power consumption and allocation for all PoE ports?
Select an answer first
7foundation · easy
A PD connected to a Dell PowerSwitch is not receiving power. Which command would you use to check if the port is configured to provide PoE?
Select an answer first
8foundation · easy
During PoE power negotiation, what does the PSE do to determine the power class of a connected PD?
Select an answer first
9foundation · easy
Which IEEE PoE standard provides up to 30 watts of power per port and is commonly used for devices like pan-tilt-zoom cameras and thin clients?
Select an answer first
10expert · hard
An admin is monitoring PoE on a Dell switch and notices that a port is in 'searching' state. What does this indicate, and what should the admin do?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.

Configure and Troubleshoot Power over Ethernet (PoE) POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Questions 6–10

Which CLI command on a Dell PowerSwitch displays the current power consumption and allocation for all PoE ports?

A PD connected to a Dell PowerSwitch is not receiving power. Which command would you use to check if the port is configured to provide PoE?

During PoE power negotiation, what does the PSE do to determine the power class of a connected PD?

Which IEEE PoE standard provides up to 30 watts of power per port and is commonly used for devices like pan-tilt-zoom cameras and thin clients?

An admin is monitoring PoE on a Dell switch and notices that a port is in 'searching' state. What does this indicate, and what should the admin do?

Keep studying — Campus Services