An administrator is preparing a node for a PowerScale cluster running OneFS 9.5. The node is currently running OneFS 9.2. The administrator has a OneFS 9.5 image and a OneFS 9.5 patch. What is the correct action to bring the node to the required version?

Apply the OneFS 9.5 patch to the node's current OneFS 9.2 installation, then reimage with the OneFS 9.5 image.

Apply the OneFS 9.5 patch to the node's current OneFS 9.2 installation.

Reimage the node with the OneFS 9.5 image.

Add the node to the cluster and then apply the OneFS 9.5 patch.

A technician is preparing a new PowerScale node for operation. The node has been powered on and the technician is at the console. What is the next step to initiate the boot process for cluster integration?

Press the power button to restart the node and enter the BIOS setup.

Select the 'Boot from internal drive' option in the boot menu.

Allow the node to boot normally from the internal drive and then run the initial configuration.

Run the 'isi setup' command to configure the node's network settings.

An administrator is preparing a replacement node to be added to an existing PowerScale cluster running OneFS 9.5. The replacement node was shipped from the factory with OneFS 9.2 and an older firmware revision. What is the required first step before the node can be safely integrated?

Replace the node's boot drive with a pre-imaged drive from the cluster vendor.

Add the node to the cluster immediately and let the cluster automatically sync the node's software.

Update the node's firmware and OneFS to versions compatible with the cluster before attempting to join it.

Boot the node standalone and run the 'isi upgrade' command to update OneFS to 9.5.

What is the primary goal of performing hardware installation checks on a PowerScale node?

To test the node's performance under load

To configure the node's network interfaces

To verify the node's firmware is up to date

To ensure all hardware components are properly installed and connected

After configuring the boot settings, what is the next step in preparing a PowerScale node for cluster integration?

Assign the node a static IP address

Verify the node's firmware version

Dell PowerScale Maintenance v2

Domain 2Objective 2

Prepare a Node for Operation POWERSCALE-MAINTENANCE Practice Questions (Page 1)

Part of the PowerScale Hardware Maintenance domain, which accounts for 25% of the POWERSCALE-MAINTENANCE exam.

19questions here

4free pages

5concepts

25%of the exam

Questions 1–5

1expert · hard
An administrator is preparing a node for a PowerScale cluster running OneFS 9.5. The node is currently running OneFS 9.2. The administrator has a OneFS 9.5 image and a OneFS 9.5 patch. What is the correct action to bring the node to the required version?
Select an answer first
2application · medium
A technician is preparing a new PowerScale node for operation. The node has been powered on and the technician is at the console. What is the next step to initiate the boot process for cluster integration?
Select an answer first
3application · medium
An administrator is preparing a replacement node to be added to an existing PowerScale cluster running OneFS 9.5. The replacement node was shipped from the factory with OneFS 9.2 and an older firmware revision. What is the required first step before the node can be safely integrated?
Select an answer first
4foundation · easy
What is the primary goal of performing hardware installation checks on a PowerScale node?
Select an answer first
5foundation · easy
After configuring the boot settings, what is the next step in preparing a PowerScale node for cluster integration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSCALE-MAINTENANCE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSCALE-MAINTENANCE” is a trademark of its owner, used for identification only.