Demonstrate the Use of Simplified Symmwin to Perform an FRU Procedure POWERMAX-MAINTENANCE Practice Questions (Page 3)

Questions 11–15

1. 11expert · hard

   A storage administrator is performing an FRU replacement on a PowerMax. The Simplified Symmwin procedure is completed, but the administrator notices that the FRU status is 'Faulted' after the procedure. What should the administrator do?

   • AInvestigate the fault, which may indicate the replacement FRU is also faulty or not properly installed.
   • BIgnore the fault because it may be a false positive.
   • CReboot the array to clear the fault status.
   • DClose the procedure because the FRU was replaced successfully.
   Reveal Solution Discussion Select an answer first
2. 12expert · hard

   A technician is replacing a faulty cache module in a PowerMax. The Simplified Symmwin procedure instructs the technician to 'Verify the FRU is recognized' after installation. The technician sees the cache module status is 'Unknown'. What should the technician do?

   • AReseat the cache module and check the status again.
   • BProceed with the next step because 'Unknown' is a normal status after installation.
   • CReplace the cache module with a different one.
   • DReboot the array to force recognition of the module.
   Reveal Solution Discussion Select an answer first
4. 13application · medium

   A storage administrator needs to replace a failed power supply in a PowerMax array. The administrator opens Simplified Symmwin and wants to start the FRU procedure for the power supply. Which action should the administrator take first?

   • ASelect the power supply in the Inventory list and click 'Remove' to physically detach it from the array.
   • BOpen the Alerts tab and click 'Clear Alert' on the power supply alert to reset the component status.
   • CUse the Service menu to run a diagnostic test on the power supply before deciding to replace it.
   • DNavigate to the Hardware view, select the failed power supply, and choose 'Replace FRU' from the context menu.
   Reveal Solution Discussion Select an answer first
5. 14expert · hard

   A storage administrator is performing an FRU replacement on a PowerMax. The Simplified Symmwin procedure is interrupted after the physical removal of the faulty FRU, and the administrator needs to resume the procedure. What should the administrator do?

   • AContact support to manually reset the FRU procedure.
   • BReopen the FRU procedure from the Hardware view for the same component and continue from the last completed step.
   • CReboot the array to reset the FRU procedure state.
   • DStart a new FRU procedure for a different component to reset the workflow.
   Reveal Solution Discussion Select an answer first
6. 15application · medium

   A storage administrator is performing an FRU replacement on a PowerMax. The administrator has completed the physical replacement and is now in the 'Completion' phase of the Simplified Symmwin procedure. What should the administrator do next?

   • AUpdate the service ticket with the FRU serial number and close the ticket.
   • BImmediately power off the array to reset all components.
   • CConfirm that the FRU is recognized and functioning correctly, then close the procedure.
   • DRun a performance test on the array to ensure no degradation.
   Reveal Solution Discussion Select an answer first