What is the first step a technician should perform when initiating a Field Replaceable Unit (FRU) procedure using Simplified Symmwin?

Power down the entire PowerMax array

Physically remove the faulty FRU from the array

Select the FRU replacement option from the Simplified Symmwin menu

Contact Dell support for approval before every FRU

A technician is replacing a faulty power supply in a PowerMax. The Simplified Symmwin procedure instructs the technician to 'Prepare for Removal'. What does this step typically involve?

Verifying that the replacement part is available in inventory.

Ensuring the power supply is in a safe state to be removed without affecting system operation.

Notifying all users of the array about the maintenance window.

Downloading the latest firmware for the replacement power supply.

A technician is using Simplified Symmwin to replace a faulty drive. The drive is part of a RAID group, and the technician notices that the drive status is 'Rebuilding' after installation. What should the technician do?

Reboot the array to speed up the rebuild process.

Immediately replace the drive again because 'Rebuilding' indicates a problem.

Remove the drive from the RAID group to stop the rebuild.

Wait for the rebuild to complete and then verify the drive status is 'Online'.

In Simplified Symmwin, a storage administrator notices that a drive in the array is displaying a 'Faulted' status indicator. What does this status indicate about the drive?

The drive has failed and requires replacement.

The drive is not recognized by the system.

The drive is temporarily offline for maintenance.

The drive is being rebuilt after a previous failure.

Dell PowerMax Maintenance

Domain 3Objective 3

Demonstrate the Use of Simplified Symmwin to Perform an FRU Procedure POWERMAX-MAINTENANCE Practice Questions (Page 1)

Part of the PowerMaxOS 10 Maintenance domain, which accounts for 33% of the POWERMAX-MAINTENANCE exam.

27questions here

6free pages

5concepts

33%of the exam

Questions 1–5

1foundation · medium
What is the first step a technician should perform when initiating a Field Replaceable Unit (FRU) procedure using Simplified Symmwin?
Select an answer first
2application · medium
A technician is replacing a faulty power supply in a PowerMax. The Simplified Symmwin procedure instructs the technician to 'Prepare for Removal'. What does this step typically involve?
Select an answer first
3expert · hard
A technician is using Simplified Symmwin to replace a faulty drive. The drive is part of a RAID group, and the technician notices that the drive status is 'Rebuilding' after installation. What should the technician do?
Select an answer first
4foundation · medium
Which of the following is a common FRU component that would be listed in Simplified Symmwin?
Select an answer first
5application · medium
In Simplified Symmwin, a storage administrator notices that a drive in the array is displaying a 'Faulted' status indicator. What does this status indicate about the drive?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERMAX-MAINTENANCE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERMAX-MAINTENANCE” is a trademark of its owner, used for identification only.