Demonstrate the Use of Simplified Symmwin Scripts and Tools to Perform a PowerMax 2500 and 8500 Installation POWERMAX-INSTALL Practice Questions (Page 4)

Questions 16–20

1. 16expert · hard

   After running Simplified Symmwin scripts on a PowerMax 8500, an engineer uses Symmwin to verify the configuration. The engineer notices that the front-end port WWNs are not as expected. What is the most likely cause?

   • AThe array's back-end disks are not fully initialized
   • BThe array's firmware is outdated
   • CThe engineer is using the wrong Symmwin tool to view WWNs
   • DThe scripts were run with an incorrect configuration file that specified the wrong WWN range
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   After running the Simplified Symmwin scripts to configure a PowerMax 2500, an engineer needs to confirm that the array's physical disks are recognized and online before proceeding with host connectivity. Which Symmwin tool should the engineer use?

   • ASymmwin Host Connectivity
   • BSymmwin Device Configuration
   • CSymmwin Disk/Array Configuration
   • DSymmwin Performance Monitor
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   What preparation step is typically required on the host before running Simplified Symmwin scripts?

   • ASetting up a VPN to the management network
   • BConfiguring SNMP traps for monitoring
   • CCreating a new storage group
   • DInstalling the latest Symmwin software version
   Reveal Solution Discussion Select an answer first
5. 19foundation · easy

   When a Simplified Symmwin script fails, what is the first step in troubleshooting?

   • ARe-run the script without changes
   • BContact Dell support before any investigation
   • CReboot the array immediately
   • DReview the script's log file for error details
   Reveal Solution Discussion Select an answer first
6. 20expert · hard

   A Simplified Symmwin script fails with a 'disk full' error, but the engineer has verified that the local drive has plenty of free space. What is the most likely cause?

   • AThe script has a bug that causes it to write an infinite loop
   • BThe script is trying to write to the array's internal storage
   • CThe script is running with insufficient memory
   • DThe script is writing to a different filesystem that is full, such as a mounted temporary partition
   Reveal Solution Discussion Select an answer first