A PowerEdge R740 server in a remote branch office has an amber LED on the system board and a beep code pattern of 2-1-4 during POST. The server does not boot. You have remote access to iDRAC. What is the most efficient first step to identify the faulty component?

Run the built-in diagnostics from the boot menu to test all hardware components

Replace the system board immediately because the amber LED indicates a board failure

Reseat all memory modules and retry booting the server

Check the iDRAC Lifecycle Log for the exact error message and affected component

When replacing a faulty memory module in a PowerEdge server, what should you do after removing the old module?

Update the BIOS before installing the new module

Insert the new module and power on the system immediately

Align the new module with the slot and press down until the retention clips lock

Apply thermal paste to the module

After replacing a faulty CPU in a PowerEdge server, you need to verify that the system is operating normally. What is the most comprehensive verification step?

Verify that the CPU is listed in the system inventory in iDRAC

Check the iDRAC logs for any new errors after boot

Boot the server and check that the OS loads without errors

Run the built-in diagnostics to test the CPU and other components

After replacing a faulty component, what is the most reliable way to verify that the system has recovered?

Ensure the error message is gone from the LCD

Confirm the system boots to the operating system and runs normally

Dell PowerEdge Operate

Domain 3Objective 1

Troubleshoot Hardware Issues on a PowerEdge Server POWEREDGE-OPERATE-V2 Practice Questions (Page 4)

Part of the Troubleshooting domain, which accounts for 22% of the POWEREDGE-OPERATE-V2 exam.

27questions here

6free pages

5concepts

22%of the exam

Questions 16–20

16application · medium
A PowerEdge R740 server in a remote branch office has an amber LED on the system board and a beep code pattern of 2-1-4 during POST. The server does not boot. You have remote access to iDRAC. What is the most efficient first step to identify the faulty component?
Select an answer first
17foundation · easy
When replacing a faulty memory module in a PowerEdge server, what should you do after removing the old module?
Select an answer first
18application · medium
After replacing a faulty CPU in a PowerEdge server, you need to verify that the system is operating normally. What is the most comprehensive verification step?
Select an answer first
19application · medium
A PowerEdge server is experiencing random reboots. The iDRAC logs show a 'voltage sensor' warning before each reboot. What is the most likely faulty component?
Select an answer first
20foundation · easy
After replacing a faulty component, what is the most reliable way to verify that the system has recovered?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.