A PowerEdge server has a blinking amber LED on the system board and the LCD shows 'PSU 1 failed'. The server is running on PSU 2. You have a replacement PSU available. What is the best course of action?

Shut down the server and replace PSU 1

Replace PSU 1 while the server is running

Replace PSU 2 because it is the only one running

Check the power cable and outlet for PSU 1

You are replacing a faulty RAID controller in a PowerEdge server. The server is powered off. What is the correct safety procedure before handling the controller?

Wear an anti-static wrist strap and ground yourself

Use a magnetized screwdriver to avoid dropping screws

Remove all power cables and wait for the power LED to turn off

Disconnect all data cables from the controller before removal

What is the primary purpose of Dell's built-in diagnostics (ePSA) on a PowerEdge server?

To run hardware tests and identify faulty components

To install the operating system

To update the server's BIOS and firmware

A PowerEdge server reports a memory error. What is the first step in isolating the faulty memory module?

Identify the specific DIMM slot from the error log

Replace all memory modules at once

A PowerEdge server has an LCD front panel that displays an error message. What is the most direct way to interpret this message?

Reboot the server to clear the message

Refer to the server's Quick Resource Locator (QRL) or documentation for the error code

Dell PowerEdge Operate

Domain 3Objective 1

Troubleshoot Hardware Issues on a PowerEdge Server POWEREDGE-OPERATE-V2 Practice Questions (Page 2)

Part of the Troubleshooting domain, which accounts for 22% of the POWEREDGE-OPERATE-V2 exam.

27questions here

6free pages

5concepts

22%of the exam

Questions 6–10

6expert · hard
A PowerEdge server has a blinking amber LED on the system board and the LCD shows 'PSU 1 failed'. The server is running on PSU 2. You have a replacement PSU available. What is the best course of action?
Select an answer first
7application · medium
You are replacing a faulty RAID controller in a PowerEdge server. The server is powered off. What is the correct safety procedure before handling the controller?
Select an answer first
8foundation · easy
What is the primary purpose of Dell's built-in diagnostics (ePSA) on a PowerEdge server?
Select an answer first
9foundation · easy
A PowerEdge server reports a memory error. What is the first step in isolating the faulty memory module?
Select an answer first
10foundation · easy
A PowerEdge server has an LCD front panel that displays an error message. What is the most direct way to interpret this message?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.