During OS installation on a PowerEdge server, when might you need to load additional drivers?

When the server has more than 4 GB of RAM

When the server's network cable is unplugged

When the installer cannot see the RAID virtual disk

When the server's BIOS is set to UEFI mode

An administrator is installing RHEL 9 on a Dell PowerEdge R750. The server has a PERC H755 controller with two 1.2 TB drives. The administrator wants to use RAID 1 for the OS. During installation, the RHEL installer does not show any disks. What is the most likely cause?

The PERC controller requires a driver that is not included in the RHEL 9 installation media.

The drives are not spinning up.

The server is in UEFI mode and RHEL 9 requires BIOS.

The RAID 1 virtual disk was not created.

A technician is installing VMware ESXi on a Dell PowerEdge R650 using virtual media via iDRAC. The technician mounted the ESXi ISO, but the server does not boot from the virtual media. The server is set to UEFI boot mode. What should the technician do?

Use a physical USB drive instead.

Re-download the ESXi ISO from VMware.

Ensure the virtual media is attached and set the boot order to boot from the virtual CD/DVD.

A technician is installing VMware ESXi on a Dell PowerEdge R450. The technician created a bootable USB using the Dell Lifecycle Controller's 'Deploy OS' feature, but the server does not boot from the USB. The server is set to UEFI boot mode. What should the technician do?

Verify that the USB is formatted as FAT32 and contains the EFI boot files.

Use the iDRAC virtual media instead.

What is a typical step during the initial configuration phase of a Windows Server installation on a PowerEdge server?

Setting the administrator password

Installing Dell OpenManage Server Administrator

Dell PowerEdge Operate

Domain 5Objective 1

Install an Operating System on a PowerEdge Server POWEREDGE-OPERATE-V2 Practice Questions (Page 3)

Part of the System Administration domain, which accounts for 20% of the POWEREDGE-OPERATE-V2 exam.

25questions here

5free pages

6concepts

20%of the exam

Questions 11–15

11foundation · easy
During OS installation on a PowerEdge server, when might you need to load additional drivers?
Select an answer first
12application · medium
An administrator is installing RHEL 9 on a Dell PowerEdge R750. The server has a PERC H755 controller with two 1.2 TB drives. The administrator wants to use RAID 1 for the OS. During installation, the RHEL installer does not show any disks. What is the most likely cause?
Select an answer first
13application · medium
A technician is installing VMware ESXi on a Dell PowerEdge R650 using virtual media via iDRAC. The technician mounted the ESXi ISO, but the server does not boot from the virtual media. The server is set to UEFI boot mode. What should the technician do?
Select an answer first
14application · medium
A technician is installing VMware ESXi on a Dell PowerEdge R450. The technician created a bootable USB using the Dell Lifecycle Controller's 'Deploy OS' feature, but the server does not boot from the USB. The server is set to UEFI boot mode. What should the technician do?
Select an answer first
15foundation · easy
What is a typical step during the initial configuration phase of a Windows Server installation on a PowerEdge server?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.