A technician is installing Windows Server 2022 on a Dell PowerEdge R450. The server is set to UEFI boot mode, and the technician has a bootable USB created with Rufus in GPT/UEFI mode. The server boots from the USB, but the installer reports that it cannot find any drives. The PERC controller is in RAID mode. What should the technician do?

Create a virtual disk in the PERC configuration utility.

Recreate the USB using DD mode.

Change the PERC controller to HBA mode.

Which of the following is a common method to create bootable installation media for a PowerEdge server?

Compress the ISO file and place it on a USB drive

Copy the OS ISO file directly onto a USB drive

Use Dell's Lifecycle Controller to mount a virtual media ISO

Rename the ISO file to .img and copy it to the drive

An administrator is installing RHEL 9 on a Dell PowerEdge R750. The server has a PERC H755 controller with eight 1.2 TB drives. The administrator wants to use RAID 10 for the OS and RAID 5 for data. During installation, the RHEL installer shows the virtual disks, but the OS partition is limited to 2 TB. What is the most likely cause?

The drives are not spinning up.

The RHEL installer does not support RAID 10.

The PERC controller is in HBA mode.

The virtual disk is using MBR partitioning, which has a 2 TB limit.

An administrator is installing RHEL 9 on a Dell PowerEdge R650 with a PERC H745 controller. The administrator created a RAID 10 virtual disk with four 1.2 TB drives. During installation, the RHEL installer does not show the virtual disk. What is the most likely cause?

The virtual disk was created with the wrong RAID level.

The PERC controller requires a driver that is not included in the RHEL 9 installation media.

The virtual disk is not initialized.

The server is in BIOS boot mode and RHEL 9 requires UEFI.

What is the purpose of creating a RAID array before installing an operating system on a PowerEdge server?

To provide a single logical disk for the OS to install on

To increase the server's network bandwidth

To enable the server to boot from the network

To reduce the server's power consumption

Dell PowerEdge Operate

Domain 5Objective 1

Install an Operating System on a PowerEdge Server POWEREDGE-OPERATE-V2 Practice Questions (Page 2)

Part of the System Administration domain, which accounts for 20% of the POWEREDGE-OPERATE-V2 exam.

25questions here

5free pages

6concepts

20%of the exam

Questions 6–10

6expert · medium
A technician is installing Windows Server 2022 on a Dell PowerEdge R450. The server is set to UEFI boot mode, and the technician has a bootable USB created with Rufus in GPT/UEFI mode. The server boots from the USB, but the installer reports that it cannot find any drives. The PERC controller is in RAID mode. What should the technician do?
Select an answer first
7foundation · easy
Which of the following is a common method to create bootable installation media for a PowerEdge server?
Select an answer first
8expert · medium
An administrator is installing RHEL 9 on a Dell PowerEdge R750. The server has a PERC H755 controller with eight 1.2 TB drives. The administrator wants to use RAID 10 for the OS and RAID 5 for data. During installation, the RHEL installer shows the virtual disks, but the OS partition is limited to 2 TB. What is the most likely cause?
Select an answer first
9application · medium
An administrator is installing RHEL 9 on a Dell PowerEdge R650 with a PERC H745 controller. The administrator created a RAID 10 virtual disk with four 1.2 TB drives. During installation, the RHEL installer does not show the virtual disk. What is the most likely cause?
Select an answer first
10foundation · easy
What is the purpose of creating a RAID array before installing an operating system on a PowerEdge server?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.

Install an Operating System on a PowerEdge Server POWEREDGE-OPERATE-V2 Practice Questions (Page 2)

Questions 6–10

Which of the following is a common method to create bootable installation media for a PowerEdge server?

An administrator is installing RHEL 9 on a Dell PowerEdge R650 with a PERC H745 controller. The administrator created a RAID 10 virtual disk with four 1.2 TB drives. During installation, the RHEL installer does not show the virtual disk. What is the most likely cause?

What is the purpose of creating a RAID array before installing an operating system on a PowerEdge server?

Keep studying — System Administration