A company is deploying an MX7000 with a mix of sleds: some have mezzanine cards that support only 25GbE, and others have mezzanine cards that support 100GbE. They want to use 100GbE IOMs for the high-performance sleds and 25GbE IOMs for the rest. What is the best way to configure the fabrics?

Use only 25GbE IOMs and upgrade the high-performance sleds to 25GbE.

Use only 100GbE IOMs and rely on auto-negotiation for 25GbE sleds.

Mix 100GbE and 25GbE IOMs in the same fabric.

Use fabric A for 100GbE IOMs and fabric B for 25GbE IOMs.

An MX7000 chassis has two 25GbE IOMs installed in slots A1 and A2. A compute sled is connected to both IOMs via its mezzanine ports. The network team wants to use link aggregation to increase bandwidth between the sled and the IOMs. What should they do?

Connect the sled to only one IOM to avoid spanning-tree issues.

Configure a port-channel on the IOMs that includes the sled's two mezzanine ports.

Enable jumbo frames on the IOMs to increase throughput.

Use only one mezzanine port and rely on the other for failover only.

What can be performed on IOMs through OpenManage Enterprise Modular?

Firmware updates and health monitoring

An MX7000 chassis is being deployed for a storage environment that requires Fibre Channel connectivity. The team has installed two Fibre Channel IOMs in slots B1 and B2. What must they ensure to provide redundancy for the storage traffic?

That the compute sleds have mezzanine cards connected to fabric B.

That the top-of-rack switches are configured for FCoE.

That the IOMs are placed in slots A1 and A2 instead.

That the sleds have at least two mezzanine cards.

Which tool is used to manage I/O modules in the Dell PowerEdge MX7000 chassis?

Dell EMC PowerEdge RAID Controller (PERC)

Dell PowerEdge MX Modular Deploy

Domain 1Objective 6

O Fabric POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 2)

Part of the MX-Series Features domain, which accounts for 27% of the POWEREDGE-MX-MODULAR-DEPLOY exam.

20questions here

4free pages

6concepts

27%of the exam

Questions 6–10

6expert · hard
A company is deploying an MX7000 with a mix of sleds: some have mezzanine cards that support only 25GbE, and others have mezzanine cards that support 100GbE. They want to use 100GbE IOMs for the high-performance sleds and 25GbE IOMs for the rest. What is the best way to configure the fabrics?
Select an answer first
7application · medium
An MX7000 chassis has two 25GbE IOMs installed in slots A1 and A2. A compute sled is connected to both IOMs via its mezzanine ports. The network team wants to use link aggregation to increase bandwidth between the sled and the IOMs. What should they do?
Select an answer first
8foundation · easy
What can be performed on IOMs through OpenManage Enterprise Modular?
Select an answer first
9application · medium
An MX7000 chassis is being deployed for a storage environment that requires Fibre Channel connectivity. The team has installed two Fibre Channel IOMs in slots B1 and B2. What must they ensure to provide redundancy for the storage traffic?
Select an answer first
10foundation · easy
Which tool is used to manage I/O modules in the Dell PowerEdge MX7000 chassis?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-MX-MODULAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-MX-MODULAR-DEPLOY” is a trademark of its owner, used for identification only.