Dell PowerEdge Foundations v2
Domain 5Objective 2
Explain the Power Distribution Considerations POWEREDGE-FOUNDATIONS-V2 Practice Questions (Page 2)
Part of the Maintenance domain, which accounts for 18% of the POWEREDGE-FOUNDATIONS-V2 exam.
23questions here
5free pages
6concepts
18%of the exam
Questions 6–10
- 6
A server has two power supplies. To achieve redundancy against a single PDU failure, how should the power supplies be connected?
Select an answer first - 7
A data center technician is deploying a rack of 20 PowerEdge servers, each with dual 750W power supplies. The facility provides two separate 30A 208V circuits to the rack. The technician must be able to remotely power-cycle individual servers without physically visiting the rack. Which PDU type should be installed?
Select an answer first - 8
What is a key reason to avoid overloading a PDU?
Select an answer first - 9
A colocation facility offers both 120V and 208V power to customers. A customer is deploying PowerEdge servers with power supplies that support both voltages. The customer wants to maximize power efficiency and reduce the number of circuits required. Which voltage should they choose?
Select an answer first - 10
A data center is being built in a region where the utility provides 230V single-phase power. The facility plans to use 30A circuits. The IT team is selecting PDUs for racks that will hold PowerEdge servers with power supplies that support 100-240V. They want to maximize power capacity per rack. What is the maximum power available per circuit at 80% load?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-FOUNDATIONS-V2” is a trademark of its owner, used for identification only.