What does a solid green link LED on a NIC port indicate?

The port has an active network link

A technician is performing maintenance on a PowerEdge server and needs to physically locate the server in a rack. The server is one of many identical servers. What is the most efficient way to identify the correct server?

Look at the front panel health LED; a solid blue LED indicates the server is the one you need.

Power off the server and see which one goes down.

Check the MAC address label on the server and compare it to the network documentation.

Use the system ID LED on the front panel, which can be turned on remotely via iDRAC.

A server administrator is troubleshooting a PowerEdge server that is not booting. The PSU LEDs are both solid green, but the front panel health LED is solid amber. What is the most likely cause?

The PSUs are faulty but the LEDs are stuck on green.

A hardware fault exists on a component other than the PSUs.

The server is in standby mode and needs to be powered on.

The PSUs are not providing enough power to the system.

What does a blinking green activity LED on a NIC port indicate?

The port is transmitting or receiving data

The port is in power-saving mode

The port is operating at a lower speed

Dell PowerEdge Foundations v2

Domain 5Objective 3

Explain the Hardware Fault Indicators in PowerEdge Servers POWEREDGE-FOUNDATIONS-V2 Practice Questions (Page 1)

Part of the Maintenance domain, which accounts for 18% of the POWEREDGE-FOUNDATIONS-V2 exam.

20questions here

4free pages

7concepts

18%of the exam

Questions 1–5

1foundation · easy
Which LED on a PowerEdge server is typically used to help a technician locate a specific server in a dense rack environment?
Select an answer first
2foundation · easy
What does a solid green link LED on a NIC port indicate?
Select an answer first
3application · medium
A technician is performing maintenance on a PowerEdge server and needs to physically locate the server in a rack. The server is one of many identical servers. What is the most efficient way to identify the correct server?
Select an answer first
4expert · medium
A server administrator is troubleshooting a PowerEdge server that is not booting. The PSU LEDs are both solid green, but the front panel health LED is solid amber. What is the most likely cause?
Select an answer first
5foundation · easy
What does a blinking green activity LED on a NIC port indicate?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-FOUNDATIONS-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-FOUNDATIONS-V2” is a trademark of its owner, used for identification only.