A server administrator notices that one drive carrier LED on a PowerEdge server is blinking amber at a steady rate. The drive is part of a RAID 5 virtual disk, and the system is still operational. What does this LED pattern indicate, and what action should be taken?

The drive has failed and must be replaced immediately to avoid data loss.

The drive is rebuilding; no immediate action is required, but monitor the rebuild progress.

The drive is offline and needs to be reinserted to restore connectivity.

The drive is in a predictive failure state and should be replaced proactively.

A server administrator is troubleshooting a network issue and observes that the NIC port link LED is solid green, but the activity LED is off. The server is not responding to ping requests. What does this indicate?

The network cable is disconnected.

The switch port is administratively down.

The NIC is faulty and needs to be replaced.

The link is established, but there is no network traffic; the issue may be at a higher layer.

A server administrator is performing maintenance on a PowerEdge server and notices that the PSU LED is off, but the server is running normally. What does this indicate?

The PSU is not receiving AC power, but the server is running on the other PSU.

The PSU is faulty and needs to be replaced immediately.

The PSU is in standby mode and will turn on when needed.

The PSU is operating normally, but the LED is disabled in the BIOS.

Dell PowerEdge Foundations v2

Domain 5Objective 3

Explain the Hardware Fault Indicators in PowerEdge Servers POWEREDGE-FOUNDATIONS-V2 Practice Questions (Page 3)

Part of the Maintenance domain, which accounts for 18% of the POWEREDGE-FOUNDATIONS-V2 exam.

20questions here

4free pages

7concepts

18%of the exam

Questions 11–15

11application · medium
A server administrator notices that one drive carrier LED on a PowerEdge server is blinking amber at a steady rate. The drive is part of a RAID 5 virtual disk, and the system is still operational. What does this LED pattern indicate, and what action should be taken?
Select an answer first
12application · medium
A server administrator is troubleshooting a network issue and observes that the NIC port link LED is solid green, but the activity LED is off. The server is not responding to ping requests. What does this indicate?
Select an answer first
13foundation · easy
Which tool provides detailed fault information that complements physical LEDs on a PowerEdge server?
Select an answer first
14application · medium
A server administrator is performing maintenance on a PowerEdge server and notices that the PSU LED is off, but the server is running normally. What does this indicate?
Select an answer first
15foundation · easy
Which internal component on a PowerEdge server typically has a status LED that can indicate a fault?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-FOUNDATIONS-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-FOUNDATIONS-V2” is a trademark of its owner, used for identification only.

Explain the Hardware Fault Indicators in PowerEdge Servers POWEREDGE-FOUNDATIONS-V2 Practice Questions (Page 3)

Questions 11–15

A server administrator notices that one drive carrier LED on a PowerEdge server is blinking amber at a steady rate. The drive is part of a RAID 5 virtual disk, and the system is still operational. What does this LED pattern indicate, and what action should be taken?

A server administrator is troubleshooting a network issue and observes that the NIC port link LED is solid green, but the activity LED is off. The server is not responding to ping requests. What does this indicate?

Which tool provides detailed fault information that complements physical LEDs on a PowerEdge server?

A server administrator is performing maintenance on a PowerEdge server and notices that the PSU LED is off, but the server is running normally. What does this indicate?

Which internal component on a PowerEdge server typically has a status LED that can indicate a fault?

Keep studying — Maintenance