Which component is the dedicated management controller used for out-of-band management in Dell PowerEdge servers?

BOSS (Boot Optimized Storage Solution)

PERC (PowerEdge RAID Controller)

iDRAC (Integrated Dell Remote Access Controller)

An administrator is automating the deployment of PowerEdge servers. The automation script needs to set the boot order and configure RAID settings before the OS is installed. The script must work without any OS running. Which management interface should the script use?

Dell OpenManage Server Administrator CLI.

Windows Management Instrumentation (WMI).

An administrator is comparing in-band and out-of-band management for a PowerEdge server. Which statement accurately describes a key difference between the two?

In-band management requires the OS to be running, while out-of-band management does not.

Out-of-band management is always faster than in-band management.

In-band management provides more hardware-level control than out-of-band management.

Out-of-band management requires the OS to be installed and configured.

A server administrator needs to apply a firmware update to a PowerEdge server that is currently powered off. The server is connected to the corporate network. Which management method should the administrator use to accomplish this task?

Use iDRAC's remote firmware update feature via the dedicated management port.

Use a KVM-over-IP session to access the BIOS during boot.

Send an IPMI command from a management workstation.

Boot the server into the OS and use the vendor's update utility.

A PowerEdge server has become unresponsive and is not accepting network connections. The administrator suspects the OS has crashed. Which management method should be used to diagnose and potentially recover the server?

Use a remote desktop session to the server.

Use Dell OpenManage Server Administrator over the network.

Use SSH to connect to the server's OS.

Use iDRAC to access the virtual console and perform a power cycle.

Dell PowerEdge Foundations v2

Domain 3Objective 1

Explain the Concepts of In-Band and Out-Of-Band Management in the Context of PowerEdge Servers POWEREDGE-FOUNDATIONS-V2 Practice Questions (Page 1)

Part of the Server Management domain, which accounts for 14% of the POWEREDGE-FOUNDATIONS-V2 exam.

24questions here

5free pages

5concepts

14%of the exam

Questions 1–5

1foundation · easy
Which component is the dedicated management controller used for out-of-band management in Dell PowerEdge servers?
Select an answer first
2expert · hard
An administrator is automating the deployment of PowerEdge servers. The automation script needs to set the boot order and configure RAID settings before the OS is installed. The script must work without any OS running. Which management interface should the script use?
Select an answer first
3application · medium
An administrator is comparing in-band and out-of-band management for a PowerEdge server. Which statement accurately describes a key difference between the two?
Select an answer first
4application · medium
A server administrator needs to apply a firmware update to a PowerEdge server that is currently powered off. The server is connected to the corporate network. Which management method should the administrator use to accomplish this task?
Select an answer first
5application · medium
A PowerEdge server has become unresponsive and is not accepting network connections. The administrator suspects the OS has crashed. Which management method should be used to diagnose and potentially recover the server?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-FOUNDATIONS-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-FOUNDATIONS-V2” is a trademark of its owner, used for identification only.