A technician is at a PowerEdge server that has no video output. The technician needs to perform at-the-box management. Which access method should the technician use?

Use the Lifecycle Controller local console via a USB drive.

Use iDRAC's virtual console over the network.

Connect a USB keyboard and use the keyboard shortcuts to navigate.

Connect a serial console cable to the server's serial port and use a terminal emulator.

A technician is troubleshooting a PowerEdge server that is not displaying any video output. The technician has a laptop with a serial port. Which at-the-box access method can the technician use?

Connect an Ethernet cable between the laptop and the server's NIC.

Use a USB keyboard and navigate blindly.

Use iDRAC's virtual console via a direct connection.

Connect a serial cable between the laptop and the server's serial port and use a terminal emulator.

A PowerEdge server is experiencing boot failures, and the administrator suspects a hardware issue. The server is not reachable over the network, and iDRAC is not responding. The administrator is physically at the server. What is the best first step?

Replace the motherboard immediately.

Use the local console to access BIOS/UEFI setup and check hardware status.

Wait for the network to come back so iDRAC can be accessed.

Reboot the server and hope the issue resolves itself.

A PowerEdge server fails to boot, and the administrator suspects a corrupted BIOS. The server has a Lifecycle Controller. The administrator is at the physical console. Which at-the-box action is most appropriate to recover the BIOS?

Access BIOS/UEFI setup and change the boot order.

Use Boot Manager to select a different boot device.

Use the Lifecycle Controller local console to restore the BIOS from a backup or factory defaults.

Dell PowerEdge Foundations v2

Domain 3Objective 4

Explain the Concept of At-The-Box Management for Dell PowerEdge Servers POWEREDGE-FOUNDATIONS-V2 Practice Questions (Page 1)

Part of the Server Management domain, which accounts for 14% of the POWEREDGE-FOUNDATIONS-V2 exam.

20questions here

4free pages

5concepts

14%of the exam

Questions 1–5

1foundation · easy
Which tool or interface is used to configure hardware settings during the boot process of a Dell PowerEdge server?
Select an answer first
2expert · hard
A technician is at a PowerEdge server that has no video output. The technician needs to perform at-the-box management. Which access method should the technician use?
Select an answer first
3application · medium
A technician is troubleshooting a PowerEdge server that is not displaying any video output. The technician has a laptop with a serial port. Which at-the-box access method can the technician use?
Select an answer first
4application · medium
A PowerEdge server is experiencing boot failures, and the administrator suspects a hardware issue. The server is not reachable over the network, and iDRAC is not responding. The administrator is physically at the server. What is the best first step?
Select an answer first
5expert · hard
A PowerEdge server fails to boot, and the administrator suspects a corrupted BIOS. The server has a Lifecycle Controller. The administrator is at the physical console. Which at-the-box action is most appropriate to recover the BIOS?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-FOUNDATIONS-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-FOUNDATIONS-V2” is a trademark of its owner, used for identification only.