Perform Site Evaluation and Remediation Procedures. MIDRANGE-STORAGE-SOLUTIONS-DESIGN Practice Questions (Page 3)

Questions 11–15

1. 11expert · hard

   A remediation plan for a Dell PowerVault ME5 array includes adding a new power circuit. The electrician installed the circuit, but the storage administrator notices that the circuit breaker is rated at 15 amps while the array's power cord requires a 20-amp circuit. The array is not yet installed. What should the administrator do?

   • AProceed with installation and monitor the breaker for trips
   • BHave the electrician replace the breaker with a 20-amp breaker and verify the wiring gauge
   • CInstall the array and rely on the power supply's internal protection
   • DUse a power distribution unit (PDU) to step down the current
   Reveal Solution Discussion Select an answer first
2. 12foundation · medium

   Which environmental condition is most important to verify during a site evaluation to prevent condensation and static discharge risks for Dell midrange storage equipment?

   • AThe room's humidity level
   • BThe room's floor color
   • CThe room's ambient lighting
   • DThe room's acoustic noise level
   Reveal Solution Discussion Select an answer first
4. 13foundation · medium

   Which network factor is most critical to evaluate for a Dell midrange storage system that will be accessed by applications over a long-distance link?

   • ANetwork latency
   • BNetwork switch model number
   • CNetwork cable length
   • DNetwork switch port color
   Reveal Solution Discussion Select an answer first
5. 14application · medium

   A company is planning to deploy a Dell PowerStore system at a branch office. The site evaluation team has been asked to gather prerequisites before visiting. The branch manager has provided floor plans, power panel schedules, and a network diagram. However, the team is missing the storage array's physical dimensions and power requirements. Which document should the team request to complete the prerequisite information?

   • AThe network switch configuration backup
   • BThe branch office's IT asset inventory list
   • CThe Dell PowerStore Installation and Service Guide
   • DThe company's disaster recovery runbook
   Reveal Solution Discussion Select an answer first
6. 15expert · hard

   A Dell PowerVault ME5 array is scheduled for installation in a server room that currently has a raised floor with limited access. The site evaluation shows that the floor tiles near the designated rack are not load-rated for the array's weight. The remediation plan includes reinforcing the floor, but the work cannot be completed before the installation date. What is the best course of action?

   • AMove the array to a different location in the room that has a load-rated floor
   • BDelay the installation until the floor reinforcement is complete
   • CInstall the array and monitor the floor for signs of stress
   • DInstall the array on a load-spreading plate that distributes the weight
   Reveal Solution Discussion Select an answer first