Perform Site Evaluation and Remediation Procedures. MIDRANGE-STORAGE-SOLUTIONS-DESIGN Practice Questions (Page 2)

Questions 6–10

1. 6foundation · medium

   Before conducting a site evaluation for a Dell midrange storage deployment, which document is most important to have on hand?

   • AThe storage array's data sheet
   • BThe site's employee roster
   • CThe storage array's installation guide
   • DThe site's floor plan and power distribution diagrams
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   A site evaluation for a Dell Unity XT deployment reveals that the server room's humidity level is consistently below the vendor's recommended minimum. The room has adequate space, power, and cooling. What should be the first remediation action?

   • ADefer the deployment until the next season when humidity is naturally higher
   • BInstall a humidifier to bring humidity into the recommended range
   • CIncrease the cooling setpoint to raise humidity naturally
   • DProceed with installation and rely on the array's internal sensors to alert if humidity becomes an issue
   Reveal Solution Discussion Select an answer first
4. 8expert · hard

   A Dell PowerStore deployment at a remote site has two deficiencies: the rack has only 1U free but the array needs 2U, and the network switch has no available 10GbE ports for the array's data connections. The site has a maintenance window next week, and the budget allows for either a new rack or a new switch, but not both. Which remediation should be prioritized?

   • AInstall a new rack, because the array cannot be physically mounted without it
   • BInstall a new switch with 10GbE ports, because network connectivity is essential for the array to function
   • CUse the array's management ports for data traffic to avoid the switch upgrade
   • DDefer the deployment until both deficiencies can be remediated
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A company is installing a Dell PowerVault ME5 array in a data center. The network team has provided a diagram showing that the array will connect to two top-of-rack switches. The switches are configured with default VLAN settings. The storage administrator needs to ensure the array can communicate with the hosts on a separate VLAN. What should be included in the remediation plan?

   • AConnect the array directly to the hosts with crossover cables
   • BChange the array's IP address to match the hosts' subnet
   • CConfigure the switch ports for the array to use the correct VLAN
   • DUse the array's management port for data traffic
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A site evaluation for a Dell Unity XT deployment identifies that the server room's fire suppression system uses a chemical agent that is not approved for occupied areas. The room is occasionally staffed. What should the remediation plan include?

   • AInstall the array and ensure personnel evacuate before the system activates
   • BPost warning signs and restrict access to the room
   • CReplace the fire suppression system with an agent approved for occupied spaces
   • DDisable the fire suppression system during deployment
   Reveal Solution Discussion Select an answer first