Summarize How to Connect Avamar Data Store to the Customer Network AVAMAR-DEPLOY Practice Questions (Page 2)

Questions 6–10

1. 6expert · hard

   A customer is deploying an Avamar Data Store node. The network team has provided the following parameters: IP address 10.0.0.10, subnet mask 255.255.255.0, and default gateway 10.0.0.1. The customer also requires that the node be on VLAN 10. The switch port is configured for VLAN 10. After connecting the node and configuring the IP settings, you find that the node cannot ping the default gateway. The link LED is solid green. What is the most likely cause of this issue?

   • AThe node's IP address is incorrect.
   • BThe switch port is configured for the wrong VLAN.
   • CThe node's subnet mask is incorrect.
   • DThe network cable is faulty.
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   After configuring the network settings on an Avamar Data Store node, you attempt to ping the default gateway from the node and it succeeds. However, you cannot ping a remote server on a different subnet. What is the most likely cause of this issue?

   • AThe node's subnet mask is incorrect.
   • BThe node's IP address is incorrect.
   • CThe network cable is faulty.
   • DThe default gateway is not routing traffic to the remote subnet.
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   You are preparing to install a new Avamar Data Store node. The customer's network team has provided the following information: IP address 10.0.0.25, subnet mask 255.255.255.0, and default gateway 10.0.0.1. The customer also states that the node must be on VLAN 100. What additional network parameter must you confirm with the network team before configuring the node?

   • AThe DNS server IP address.
   • BThe MAC address of the node's NIC.
   • CThe VLAN ID that the switch port will be assigned to.
   • DThe hostname of the node.
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   Which command is commonly used to verify basic network connectivity from an Avamar Data Store node?

   • Atraceroute
   • Bping
   • Cnetstat
   • Difconfig
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   What cabling requirement is typically specified for connecting an Avamar Data Store node to a customer network switch?

   • ASerial cable with DB9 connectors
   • BFiber optic cable with LC connectors
   • CCoaxial cable with BNC connectors
   • DCat5e or Cat6 copper Ethernet cable with RJ45 connectors
   Reveal Solution Discussion Select an answer first