What is the primary advantage of using a switch-based connection for Avamar Data Store nodes compared to direct connections?

It eliminates the need for IP addressing

It provides a scalable and flexible way to connect multiple nodes

It allows multiple nodes to connect to the network using a single physical port

It guarantees higher bandwidth than any direct connection

Which of the following describes a supported method for physically connecting Avamar Data Store nodes to the customer network?

Connection through a network switch using Ethernet cabling

Connection through a USB-to-Ethernet adapter

Wireless connection using Wi-Fi adapters

Direct connection from each node to a dedicated router port

If an Avamar Data Store node cannot ping its default gateway, what is the most likely cause?

The node's hostname is not registered in DNS

The node's firewall is blocking outbound traffic

Incorrect DNS server configuration

Incorrect IP address or subnet mask on the node

You are configuring a new Avamar Data Store node. The customer's network team has provided the following parameters: IP address 10.10.10.50, subnet mask 255.255.255.0, and default gateway 10.10.10.1. The customer also requires that the node be on VLAN 200. The switch port is configured for VLAN 200. After configuring the node, you can ping the default gateway, but you cannot ping a server on a different subnet (10.20.20.10). What is the most likely cause of this issue?

The default gateway is not configured to route between VLAN 200 and the other subnet.

The node's IP address is incorrect.

The node's subnet mask is incorrect.

The switch port is not configured for VLAN 200.

Which of the following is the first step in configuring network settings on an Avamar Data Store node?

Pinging the node from a management workstation

Connecting to the node's console or management interface

Configuring the default gateway

Assigning an IP address to the node

Dell Avamar Deploy

Domain 3Objective 4

Summarize How to Connect Avamar Data Store to the Customer Network AVAMAR-DEPLOY Practice Questions (Page 1)

Part of the Avamar Installation and Maintenance domain, which accounts for 24% of the AVAMAR-DEPLOY exam.

13questions here

3free pages

4concepts

24%of the exam

Questions 1–5

1foundation · easy
What is the primary advantage of using a switch-based connection for Avamar Data Store nodes compared to direct connections?
Select an answer first
2foundation · easy
Which of the following describes a supported method for physically connecting Avamar Data Store nodes to the customer network?
Select an answer first
3foundation · easy
If an Avamar Data Store node cannot ping its default gateway, what is the most likely cause?
Select an answer first
4expert · hard
You are configuring a new Avamar Data Store node. The customer's network team has provided the following parameters: IP address 10.10.10.50, subnet mask 255.255.255.0, and default gateway 10.10.10.1. The customer also requires that the node be on VLAN 200. The switch port is configured for VLAN 200. After configuring the node, you can ping the default gateway, but you cannot ping a server on a different subnet (10.20.20.10). What is the most likely cause of this issue?
Select an answer first
5foundation · easy
Which of the following is the first step in configuring network settings on an Avamar Data Store node?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to AVAMAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “AVAMAR-DEPLOY” is a trademark of its owner, used for identification only.