Install Avamar Data Store Hardware AVAMAR-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1foundation · medium

   After installing an Avamar Data Store, which action is part of verifying the hardware installation?

   • AInstalling the Avamar client software on the backup server
   • BConfiguring the backup schedule for the first client
   • CChecking that all nodes and storage shelves report online in the Avamar management interface
   • DSetting up the replication target for offsite backups
   Reveal Solution Discussion Select an answer first
2. 2foundation · medium

   During a site survey for a new Avamar Data Store, a technician needs to identify the physical component that provides the primary deduplication storage capacity for user backups. Which component is this?

   • AThe Avamar Data Store node's internal SATA drives
   • BThe external storage shelves connected to the Avamar nodes
   • CThe RAID controller card installed in each Avamar node
   • DThe network interface cards (NICs) on the Avamar nodes
   Reveal Solution Discussion Select an answer first
4. 3foundation · medium

   Which hardware specification is a required characteristic of Avamar Data Store nodes to support the Avamar software and expected backup workloads?

   • AA minimum of 10 TB of internal SSD storage per node
   • BA specific CPU model and core count as defined by the Avamar model specification
   • CA minimum of 64 GB of RAM per node
   • DAt least two 10 GbE network ports for front-end and back-end traffic
   Reveal Solution Discussion Select an answer first
5. 4foundation · medium

   During the planning phase for an Avamar Data Store installation, which activity is part of site preparation?

   • AConnecting the storage shelves to the Avamar nodes
   • BVerifying that the rack has sufficient power and cooling capacity
   • CRunning the Avamar installation verification tests
   • DConfiguring the Avamar software license keys
   Reveal Solution Discussion Select an answer first
6. 5foundation · medium

   During the physical installation of an Avamar Data Store, what is the correct sequence for racking and cabling the components?

   • ARack the storage shelves first, then rack the nodes, then cable the nodes to the shelves and network
   • BPower on the nodes, then rack the storage shelves, then cable the nodes
   • CCable the nodes to the network, then rack the nodes, then rack the storage shelves
   • DRack the nodes first, then cable the nodes to the network, then rack the storage shelves
   Reveal Solution Discussion Select an answer first