An administrator is planning to configure replication between two Avamar systems. The primary system has 10 TB of data, and the secondary system has 5 TB of free space. The administrator expects the replicated data to be deduplicated. What should the administrator do before configuring replication?

Configure the replication schedule to run during off-peak hours.

Verify that the network link between the systems is at least 1 Gbps.

Increase the secondary system's storage to at least 10 TB.

Ensure the secondary system has enough storage capacity to hold the replicated data after deduplication.

What is the purpose of bandwidth throttling in Avamar replication?

To encrypt replication traffic for security

To increase the speed of replication by prioritizing traffic

To compress replication data to reduce bandwidth usage

To limit the amount of network bandwidth used by replication traffic

What is the purpose of a failover in Avamar replication?

To increase the speed of replication jobs

To continue backup and recovery operations using the replicated system if the primary system fails

To permanently replace the primary system with the replicated system

To test the replication schedule without affecting production

After a failover to a replicated Avamar system, the original primary system is repaired and brought back online. The administrator wants to return to the original primary system as the active backup target. What should the administrator do?

Run a validation job on the original primary system.

Perform a failback from the replicated system to the original primary.

Replicate the original primary system to the replicated system.

Delete the replicated system and reconfigure replication from the primary.

What is a common cause of authentication failures during Avamar replication?

The replication schedule being set to run too frequently

Insufficient storage on the destination system

Network bandwidth throttling settings

Incorrect credentials or mismatched encryption keys between systems

Dell Avamar Deploy

Domain 4Objective 4

Configure and Run Avamar Replication Solutions AVAMAR-DEPLOY Practice Questions (Page 1)

Part of the Avamar Administration domain, which accounts for 45% of the AVAMAR-DEPLOY exam.

29questions here

6free pages

8concepts

45%of the exam

Questions 1–5

1application · medium
An administrator is planning to configure replication between two Avamar systems. The primary system has 10 TB of data, and the secondary system has 5 TB of free space. The administrator expects the replicated data to be deduplicated. What should the administrator do before configuring replication?
Select an answer first
2foundation · easy
What is the purpose of bandwidth throttling in Avamar replication?
Select an answer first
3foundation · easy
What is the purpose of a failover in Avamar replication?
Select an answer first
4expert · medium
After a failover to a replicated Avamar system, the original primary system is repaired and brought back online. The administrator wants to return to the original primary system as the active backup target. What should the administrator do?
Select an answer first
5foundation · easy
What is a common cause of authentication failures during Avamar replication?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to AVAMAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “AVAMAR-DEPLOY” is a trademark of its owner, used for identification only.