An administrator needs to perform a major software upgrade on an HA pair. The administrator wants to minimize downtime and ensure the pair remains available during the upgrade. What is the correct procedure?

Disable HA, upgrade both nodes, then re-enable HA.

Reboot both nodes simultaneously and upgrade them at the same time.

Upgrade the primary node first, then the secondary node.

Upgrade the secondary node first, then force a failover and upgrade the old primary.

An HA pair is configured with a dedicated HA link. The administrator notices that the pair is not failing over when the primary node's upstream interface goes down. The 'show ha status' output shows the pair is in a 'PRIMARY' and 'SECONDARY' state, and the heartbeat is stable. What is the most likely cause of this behavior?

The HA heartbeat is being sent on the wrong interface.

The HA pair is configured with 'failover' mode set to 'manual', so automatic failover is disabled.

The interface monitoring is not configured on the upstream interface.

The secondary node is down or not responding.

An administrator needs to perform maintenance on the primary node of an HA pair. The administrator wants to ensure the secondary node takes over cleanly and the primary does not attempt to fail back during the maintenance. What is the correct sequence of actions?

Reboot the primary node; the secondary will automatically take over and the primary will fail back after reboot.

Shut down the primary node; the secondary will take over, and the primary will remain secondary after it is powered back on.

Disable HA on the primary, perform maintenance, then re-enable HA and force a failover.

Force a failover to the secondary, then disable HA on the primary before performing maintenance.

In the Citrix ADC GUI, which section is used to verify HA synchronization status?

Traffic Management > Load Balancing

What is a common cause of configuration propagation delays in a Citrix ADC HA pair?

Large configuration files take time to synchronize.

The secondary node is in a failed state.

The primary node is overloaded with traffic.

The heartbeat interval is set too high.

CitrixCertified Associate – App Delivery and Security (CCA-AppDS) – Traffic Management

Domain 4Objective 2

Troubleshoot High Availability CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 1)

Part of the Domain 4: High Availability domain, which makes up ~7% of our current practice bank.

26questions here

6free pages

7concepts

Questions 1–5

1expert · medium
An administrator needs to perform a major software upgrade on an HA pair. The administrator wants to minimize downtime and ensure the pair remains available during the upgrade. What is the correct procedure?
Select an answer first
2expert · medium
An HA pair is configured with a dedicated HA link. The administrator notices that the pair is not failing over when the primary node's upstream interface goes down. The 'show ha status' output shows the pair is in a 'PRIMARY' and 'SECONDARY' state, and the heartbeat is stable. What is the most likely cause of this behavior?
Select an answer first
3application · medium
An administrator needs to perform maintenance on the primary node of an HA pair. The administrator wants to ensure the secondary node takes over cleanly and the primary does not attempt to fail back during the maintenance. What is the correct sequence of actions?
Select an answer first
4foundation · easy
In the Citrix ADC GUI, which section is used to verify HA synchronization status?
Select an answer first
5foundation · easy
What is a common cause of configuration propagation delays in a Citrix ADC HA pair?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCA-APPDS-TRAFFIC-MANAGEMENT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Citrix. “CCA-APPDS-TRAFFIC-MANAGEMENT” is a trademark of its owner, used for identification only.