Manage IP Addresses and Routing CCA-APPDS-GATEWAY Practice Questions (Page 2)

Questions 6–10

1. 6expert · hard

   A Citrix Gateway has a default route via 192.168.1.1 and a static route for 10.0.0.0/8 via 10.0.0.1 with a metric of 5. The administrator needs to add a route for 10.20.0.0/16 via 10.0.0.2 to handle traffic for a specific branch office. What metric should be assigned to this new route to ensure it is used for 10.20.0.0/16 traffic?

   • AAny metric will work because the /16 route is more specific.
   • BMetric of 1
   • CMetric of 5
   • DMetric of 10
   Reveal Solution Discussion Select an answer first
2. 7expert · hard

   A Citrix Gateway has two routes to the 10.50.0.0/16 network: one via 172.16.1.1 with a metric of 50, and another via 192.168.1.1 with a metric of 100. The administrator wants to ensure that traffic uses the 172.16.1.1 path unless it becomes unavailable. Which configuration change will achieve this behavior?

   • AConfigure a route monitor or gateway tracking on the 172.16.1.1 route.
   • BIncrease the metric of the 192.168.1.1 route to 200.
   • CRemove the 192.168.1.1 route and add it back only when the primary fails.
   • DDecrease the metric of the 172.16.1.1 route to 10.
   Reveal Solution Discussion Select an answer first
4. 8expert · hard

   A Citrix Gateway appliance is experiencing intermittent connectivity to a backend server at 10.20.30.40. The administrator runs a traceroute and sees that packets reach the default gateway (192.168.1.1) but then stop. The routing table shows a static route for 10.20.30.0/24 via 192.168.1.1. What is the most likely cause of the issue?

   • AThe default gateway is not forwarding packets to the 10.20.30.0/24 network.
   • BThe backend server is on the same subnet as the appliance.
   • CThe static route on the appliance is incorrect.
   • DThe appliance's IP address is misconfigured.
   Reveal Solution Discussion Select an answer first
5. 9application · easy

   An administrator needs to view the current routing table on a Citrix Gateway to verify that a newly added static route is present. Which command or interface should be used?

   • AUse the 'traceroute' command to verify the route.
   • BUse the 'arp' command to verify the route.
   • CUse the 'ping' command to verify the route.
   • DUse the 'show route' command in the CLI or navigate to the Routing table section in the GUI.
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   What is the primary purpose of the routing table on a Citrix Gateway appliance?

   • ATo list all connected users and their sessions
   • BTo store DNS records for name resolution
   • CTo configure firewall rules for traffic filtering
   • DTo determine the next hop for forwarding packets to their destination
   Reveal Solution Discussion Select an answer first