A company is deploying SD-WAN at a branch office with two WAN circuits: a 100 Mbps MPLS circuit and a 500 Mbps broadband Internet circuit. The branch router will use both circuits as transport. The network team wants to ensure that the MPLS circuit is preferred for all traffic unless it fails. What should be configured to achieve this?

Configure a localized data policy to set the DSCP value on MPLS traffic.

Set the TLOC preference for the MPLS TLOC higher than the Internet TLOC in a centralized control policy.

Use a VPN membership list to restrict the Internet circuit to specific VRFs.

Adjust the OMP administrative distance on the branch router to prefer MPLS routes.

An organization is deploying 200 identical branch routers. To save time, the network team wants to standardize the configuration using templates. They need to ensure that each router gets a unique hostname and loopback IP address. Which approach should they use?

Create a single feature template that includes the hostname and loopback, and apply it to all devices.

Manually configure each router after applying the template.

Use the CLI template with the same hostname for all routers.

Create a feature template for the hostname and loopback, and use device-specific variables in the device template.

A company uses SD-WAN with two transport circuits at each branch. They want to ensure that voice traffic from a specific site always uses the MPLS circuit, even if the Internet circuit has better performance. Which policy should be applied?

A localized control policy that changes the OMP metric for voice routes.

A centralized data policy that matches voice traffic and sets the preferred TLOC to MPLS.

A centralized control policy that sets the TLOC preference for all routes from the branch.

A localized data policy that marks voice traffic with a high DSCP value.

A branch router has two WAN interfaces. The network administrator wants to apply QoS policies to prioritize VoIP traffic over other traffic on the access link. Which type of policy should be configured?

A centralized control policy to influence routing.

A centralized data policy applied from vSmart.

A localized control policy to change OMP attributes.

A localized data policy applied to the WAN interface.

A network engineer is troubleshooting why a branch router is not receiving routes from a remote site. The OMP peering is up, but the remote site's routes are not present in the routing table. Which configuration should be checked first?

Verify that the branch router's TLOC is active.

Check the underlay routing protocol configuration on the branch router.

Ensure that the branch router has a default route in the service VPN.

Verify that the remote site's routes are advertised via OMP and that no control policy is filtering them.

CCIE Enterprise Infrastructure

Domain 2Objective 2

Cisco SD-WAN CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 5)

Part of the Software-Defined Infrastructure domain, which accounts for 25% of the CCIE-ENTERPRISE-INFRASTRUCTURE exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 7–10 from this objective — we provide 28 practice questions to prepare you well beyond it. (estimate)

28questions here

6free pages

6concepts

25%of the exam

Questions 21–25

21application · medium
A company is deploying SD-WAN at a branch office with two WAN circuits: a 100 Mbps MPLS circuit and a 500 Mbps broadband Internet circuit. The branch router will use both circuits as transport. The network team wants to ensure that the MPLS circuit is preferred for all traffic unless it fails. What should be configured to achieve this?
Select an answer first
22application · medium
An organization is deploying 200 identical branch routers. To save time, the network team wants to standardize the configuration using templates. They need to ensure that each router gets a unique hostname and loopback IP address. Which approach should they use?
Select an answer first
23application · medium
A company uses SD-WAN with two transport circuits at each branch. They want to ensure that voice traffic from a specific site always uses the MPLS circuit, even if the Internet circuit has better performance. Which policy should be applied?
Select an answer first
24application · medium
A branch router has two WAN interfaces. The network administrator wants to apply QoS policies to prioritize VoIP traffic over other traffic on the access link. Which type of policy should be configured?
Select an answer first
25application · medium
A network engineer is troubleshooting why a branch router is not receiving routes from a remote site. The OMP peering is up, but the remote site's routes are not present in the routing table. Which configuration should be checked first?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCIE-ENTERPRISE-INFRASTRUCTURE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-ENTERPRISE-INFRASTRUCTURE” is a trademark of its owner, used for identification only.