Cisco SD-WAN CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 3)

Questions 11–15

1. 11foundation · easy

   How does a device template relate to feature templates in Cisco SD-WAN?

   • AA device template replaces the need for feature templates.
   • BA device template is applied to all devices in the fabric automatically.
   • CA device template is composed of one or more feature templates and is applied to a specific device.
   • DA device template is used only for monitoring, not configuration.
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   What is the primary function of a centralized control policy in Cisco SD-WAN?

   • ATo influence the routing decisions and path selection across the SD-WAN fabric.
   • BTo apply QoS markings on data traffic at the WAN edge.
   • CTo authenticate users accessing the SD-WAN fabric.
   • DTo filter traffic based on source/destination IP addresses.
   Reveal Solution Discussion Select an answer first
4. 13application · medium

   A global enterprise is deploying Cisco SD-WAN across 50 sites. The network team wants to ensure that all WAN edge routers automatically discover the vSmart controllers and vManage without manual configuration on each device. The underlay uses both MPLS and Internet circuits. Which action should the team take to meet this requirement?

   • AUse a feature template to push the vManage IP address to all WAN edge routers.
   • BManually configure the IP addresses of all vSmart controllers on every WAN edge router.
   • CConfigure the vBond controller with the enterprise's DNS domain and ensure the WAN edge routers can resolve the vBond hostname via DNS.
   • DEnable DHCP option 150 on the underlay to provide the vBond address.
   Reveal Solution Discussion Select an answer first
5. 14application · medium

   A branch router has a local network with multiple subnets. The administrator wants to block traffic from a specific subnet to the WAN. Which localized policy should be configured?

   • AA centralized data policy that matches the subnet and drops traffic.
   • BA localized data policy with an access control list that denies traffic from the subnet.
   • CA centralized control policy that changes the TLOC preference.
   • DA localized control policy that filters OMP routes.
   Reveal Solution Discussion Select an answer first
6. 15expert · medium

   A large enterprise has deployed SD-WAN with two hubs (data centers) and 200 branches. Each branch has two TLOCs (MPLS and Internet). The network team wants to ensure that all traffic from branches to the data centers uses the MPLS TLOC when available, but fails over to Internet if MPLS is down. They also want to load-balance traffic between the two data centers. Which configuration should be implemented?

   • AApply a centralized data policy that matches all traffic and sets the TLOC to MPLS, with a second policy for load balancing.
   • BUse a localized data policy to set the DSCP value on MPLS traffic.
   • CConfigure the branch routers with a static route to the data centers using the MPLS TLOC.
   • DApply a centralized control policy that sets TLOC preference to prefer MPLS TLOCs and uses OMP metric to load-balance between data centers.
   Reveal Solution Discussion Select an answer first