In the SD-WAN underlay network, what is the role of a transport location (TLOC)?

It is a policy that defines which circuits are preferred for traffic.

It identifies a specific physical interface on a WAN edge router that connects to a service provider circuit.

It is a label used to identify a vSmart controller in the control plane.

It is a logical identifier for a VPN in the overlay network.

Which of the following is a common design consideration when designing the SD-WAN underlay network?

Using the same transport provider for all WAN edge connections to simplify routing.

Placing all WAN edge routers in a single geographic location to reduce latency.

Ensuring that each WAN edge router has at least two transport connections for redundancy.

Using only MPLS circuits to guarantee QoS.

What is the primary purpose of the Overlay Management Protocol (OMP) in Cisco SD-WAN?

To monitor the health of the underlay network.

To exchange routing information and establish the overlay network between vSmart and vEdge routers.

To provide secure transport for data traffic between sites.

To authenticate vEdge routers during initial bring-up.

In OMP, what does a TLOC represent?

A type of VPN service in the overlay.

A policy that controls path selection.

A transport location, which is the next hop for reaching a prefix in the overlay.

What is the purpose of a feature template in Cisco SD-WAN?

To store the device's running configuration for backup.

To define the underlay routing protocol for all devices.

To create a list of allowed IP addresses for management access.

To define a reusable set of configuration parameters for a specific feature, such as OSPF or BGP.

CCIE Enterprise Infrastructure

Domain 2Objective 2

Cisco SD-WAN CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 2)

Part of the Software-Defined Infrastructure domain, which accounts for 25% of the CCIE-ENTERPRISE-INFRASTRUCTURE exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 7–10 from this objective — we provide 28 practice questions to prepare you well beyond it. (estimate)

28questions here

6free pages

6concepts

25%of the exam

Questions 6–10

6foundation · easy
In the SD-WAN underlay network, what is the role of a transport location (TLOC)?
Select an answer first
7foundation · easy
Which of the following is a common design consideration when designing the SD-WAN underlay network?
Select an answer first
8foundation · easy
What is the primary purpose of the Overlay Management Protocol (OMP) in Cisco SD-WAN?
Select an answer first
9foundation · easy
In OMP, what does a TLOC represent?
Select an answer first
10foundation · easy
What is the purpose of a feature template in Cisco SD-WAN?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCIE-ENTERPRISE-INFRASTRUCTURE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-ENTERPRISE-INFRASTRUCTURE” is a trademark of its owner, used for identification only.