A technician is upgrading a Cisco ISR 4331 router using bundle mode. The technician has copied the new IOS XE image to flash. Which configuration command must be added to the startup configuration to ensure the router loads the new image on the next reload?

ip boot image flash:isr4300-universalk9.16.09.05.SPA.bin

boot system flash:isr4300-universalk9.16.09.05.SPA.bin

install add file flash:isr4300-universalk9.16.09.05.SPA.bin

copy flash:isr4300-universalk9.16.09.05.SPA.bin running-config

A network engineer is upgrading a Catalyst 9300 switch using install mode. The engineer has run 'install add file flash:cat9k_iosxe.17.06.01.SPA.bin' and then 'install activate'. The switch reloads and comes back up with the new image. The engineer wants to make the new image permanent. What command should be run next?

copy running-config startup-config

Which command is used to initiate an install mode installation of a Cisco IOS image?

install add file flash:image.bin activate

A field technician is at a customer site and needs to back up the current IOS image from a Cisco router to a laptop. The laptop is running a TFTP server. The technician has confirmed IP connectivity between the laptop and the router. Which command should the technician use on the router to back up the image?

copy tftp://192.168.1.100/ flash:c2900-universalk9-mz.SPA.152-4.M6.bin

copy startup-config tftp://192.168.1.100/

copy flash:c2900-universalk9-mz.SPA.152-4.M6.bin tftp://192.168.1.100/

copy running-config tftp://192.168.1.100/

A technician is upgrading a Cisco ISR 4331 router using bundle mode. The technician has copied the new image to flash and configured the 'boot system flash:isr4300-universalk9.16.09.05.SPA.bin' command. What is the next step to complete the upgrade?

Run 'install commit' to finalize the upgrade.

Immediately reload the router without saving the configuration.

Save the configuration with 'write memory' and then reload the router.

Copy the running-config to the TFTP server.

CiscoCertified Field Technician (CCT)

Domain 3Objective 3

3.3 Manage Cisco Software Images 800-150 Practice Questions (Page 5)

Part of the 3.0 Cisco Software domain, which accounts for 10% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–2 from this objective — we provide 29 practice questions to prepare you well beyond it. (estimate)

29questions here

6free pages

8concepts

10%of the exam

Questions 21–25

21application · medium
A technician is upgrading a Cisco ISR 4331 router using bundle mode. The technician has copied the new IOS XE image to flash. Which configuration command must be added to the startup configuration to ensure the router loads the new image on the next reload?
Select an answer first
22expert · hard
A network engineer is upgrading a Catalyst 9300 switch using install mode. The engineer has run 'install add file flash:cat9k_iosxe.17.06.01.SPA.bin' and then 'install activate'. The switch reloads and comes back up with the new image. The engineer wants to make the new image permanent. What command should be run next?
Select an answer first
23foundation · easy
Which command is used to initiate an install mode installation of a Cisco IOS image?
Select an answer first
24application · medium
A field technician is at a customer site and needs to back up the current IOS image from a Cisco router to a laptop. The laptop is running a TFTP server. The technician has confirmed IP connectivity between the laptop and the router. Which command should the technician use on the router to back up the image?
Select an answer first
25application · medium
A technician is upgrading a Cisco ISR 4331 router using bundle mode. The technician has copied the new image to flash and configured the 'boot system flash:isr4300-universalk9.16.09.05.SPA.bin' command. What is the next step to complete the upgrade?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.

3.3 Manage Cisco Software Images 800-150 Practice Questions (Page 5)

Questions 21–25

A technician is upgrading a Cisco ISR 4331 router using bundle mode. The technician has copied the new IOS XE image to flash. Which configuration command must be added to the startup configuration to ensure the router loads the new image on the next reload?

Which command is used to initiate an install mode installation of a Cisco IOS image?

A technician is upgrading a Cisco ISR 4331 router using bundle mode. The technician has copied the new image to flash and configured the 'boot system flash:isr4300-universalk9.16.09.05.SPA.bin' command. What is the next step to complete the upgrade?

Keep studying — 3.0 Cisco Software