Before using FTP to transfer an IOS image to a Cisco device, what must be configured on the FTP server?

A DHCP reservation for the device.

A valid username and password for authentication.

What is a characteristic of install mode for installing a Cisco IOS image?

It requires a reload to activate the new image.

It only works with TFTP as the source.

It does not require any reboot.

It automatically backs up the old image.

A technician is backing up the IOS image from a Cisco router to a TFTP server. The technician issues the command 'copy flash:c2900-universalk9-mz.SPA.152-4.M6.bin tftp://192.168.1.100/'. The router prompts for a destination filename. What should the technician enter?

The destination directory path on the TFTP server.

The IP address of the TFTP server.

The same filename as the source, e.g., 'c2900-universalk9-mz.SPA.152-4.M6.bin'.

A field technician is upgrading a Cisco router at a site with no network access to the corporate servers. The technician has the new IOS image on a USB drive. After inserting the USB drive, the technician issues 'dir usbflash0:' and sees the image file. What is the next step to install the image?

Use the 'install add file usbflash0: ' command.

Use the 'copy usbflash0: flash:' command to copy the image to flash.

Use the 'boot system usbflash0: ' command and reload the router.

Reboot the router with the USB drive still inserted.

CiscoCertified Field Technician (CCT)

Domain 3Objective 3

3.3 Manage Cisco Software Images 800-150 Practice Questions (Page 4)

Part of the 3.0 Cisco Software domain, which accounts for 10% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–2 from this objective — we provide 29 practice questions to prepare you well beyond it. (estimate)

29questions here

6free pages

8concepts

10%of the exam

Questions 16–20

16foundation · easy
Before using FTP to transfer an IOS image to a Cisco device, what must be configured on the FTP server?
Select an answer first
17foundation · easy
What is a characteristic of install mode for installing a Cisco IOS image?
Select an answer first
18foundation · easy
Which command correctly initiates a TFTP transfer to copy an IOS image from a TFTP server to a Cisco device?
Select an answer first
19application · easy
A technician is backing up the IOS image from a Cisco router to a TFTP server. The technician issues the command 'copy flash:c2900-universalk9-mz.SPA.152-4.M6.bin tftp://192.168.1.100/'. The router prompts for a destination filename. What should the technician enter?
Select an answer first
20application · medium
A field technician is upgrading a Cisco router at a site with no network access to the corporate servers. The technician has the new IOS image on a USB drive. After inserting the USB drive, the technician issues 'dir usbflash0:' and sees the image file. What is the next step to install the image?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.