What is the purpose of configuring DSCP tags in Meraki QoS policies?

To assign IP addresses to voice devices

To encrypt voice traffic between switches

To block unwanted traffic from entering the network

To identify and prioritize traffic based on its class

A company wants to implement NAC to ensure that only devices with up-to-date antivirus software can access the network. They have a mix of wired and wireless devices. Which Meraki feature should be used to achieve this?

Enable MAC filtering to allow only known devices.

Integrate with Cisco ISE and configure 802.1X with posture assessment.

Use a captive portal with username and password authentication.

Configure DHCP snooping to ensure devices receive valid IP addresses.

What is the purpose of traffic shaping on an MR access point?

To assign VLANs to wireless clients

To block malicious traffic from entering the network

To encrypt traffic between the AP and clients

To limit the bandwidth available to specific clients or applications

What is the goal of a MAC flooding attack?

To assign incorrect IP addresses to clients

To exhaust the switch's MAC address table so it floods traffic to all ports

To redirect traffic by poisoning the ARP cache

To create a loop in the network to cause a broadcast storm

CiscoMeraki Solutions Specialist (ECMS)

Domain 2Objective 5

2.5 Design Enterprise Network Services 500-220 Practice Questions (Page 5)

Part of the Design domain, which accounts for 30% of the 500-220 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~11–18 in this domain), expect 2–3 from this objective — we provide 37 practice questions to prepare you well beyond it. (estimate)

37questions here

8free pages

10concepts

30%of the exam

Questions 21–25

21foundation · easy
Which QoS mechanism is responsible for marking packets with a priority value that other devices can recognize?
Select an answer first
22foundation · easy
What is the purpose of configuring DSCP tags in Meraki QoS policies?
Select an answer first
23application · medium
A company wants to implement NAC to ensure that only devices with up-to-date antivirus software can access the network. They have a mix of wired and wireless devices. Which Meraki feature should be used to achieve this?
Select an answer first
24foundation · easy
What is the purpose of traffic shaping on an MR access point?
Select an answer first
25foundation · easy
What is the goal of a MAC flooding attack?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 500-220

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “500-220” is a trademark of its owner, used for identification only.