2.5 Design Enterprise Network Services 500-220 Practice Questions (Page 4)

Questions 16–20

1. 16expert · hard

   A hospital is implementing NAC to ensure that only compliant devices can access the network. They have both wired and wireless networks. The administrator wants to use Cisco ISE for policy enforcement. Which Meraki features should be configured to support this integration?

   • A802.1X on both wired and wireless networks with RADIUS pointing to ISE.
   • BMAC filtering on both wired and wireless networks.
   • CTraffic shaping on the wireless network to prioritize ISE traffic.
   • DDHCP snooping and dynamic ARP inspection on the wired network.
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   A law firm is deploying VoIP phones and wants to ensure call quality even when the network is under heavy file-transfer load. The phones will be on the same VLAN as the PCs. What should the administrator configure on the Meraki switch ports to prioritize the voice traffic?

   • AConfigure a traffic shaping rule on the switch to limit file-transfer bandwidth.
   • BSet the DSCP value on the phones and configure the switch to trust the incoming markings.
   • CEnable port security and set a maximum of two MAC addresses per port.
   • DEnable DHCP snooping on the voice VLAN to ensure the phones receive valid IP addresses.
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   Which redundant network design provides multiple physical paths between switches while preventing loops at Layer 2?

   • AUsing a single core switch with redundant power supplies
   • BStacking switches with a single management plane
   • CDual uplinks from access switches to two distribution switches
   • DLink aggregation (EtherChannel) between two switches
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   A retail chain uses Meraki MR access points for guest Wi-Fi and internal operations. The store manager complains that video conferencing on the corporate SSID is choppy during peak hours. The administrator wants to ensure that video traffic gets priority over general web browsing without affecting the guest network. What should the administrator do?

   • ASet the corporate SSID to use WPA2-Enterprise with 802.1X authentication.
   • BEnable layer 3 roaming on the corporate SSID to improve handoff performance.
   • CConfigure the guest SSID with a bandwidth limit to free up airtime for the corporate network.
   • DCreate a traffic shaping rule on the corporate SSID to prioritize traffic to the video conferencing service.
   Reveal Solution Discussion Select an answer first
6. 20expert · hard

   A hospital is designing a new network for its critical care unit. The network must support VoIP phones and electronic health record (EHR) access with no downtime. The budget allows for two Meraki MS switches and one MX security appliance. The administrator wants to ensure that if one switch fails, the phones and workstations connected to it can still reach the network. Which design provides the best resilience while meeting the budget?

   • AUse the two switches independently and connect the MX to only one switch.
   • BUse the two switches independently and connect the MX to both, relying on spanning tree.
   • CStack the two switches and connect the MX to both members of the stack.
   • DUse the two switches independently and enable VRRP between them.
   Reveal Solution Discussion Select an answer first