A company is designing a network with two Meraki MS switches and wants to ensure high availability for a critical server that has two NICs. The server will be connected to both switches. The administrator wants to avoid a loop and ensure that if one switch fails, the server can still communicate. What should the administrator configure?

Connect the server to both switches and rely on spanning tree to block one link.

Enable link aggregation on the server and configure a port channel on both switches.

Enable VRRP on the switches to provide gateway redundancy.

Use port security on the switches to limit the server's MAC address to one port.

A manufacturing company has a Meraki MX at the internet edge. The security team wants to block all inbound traffic from the internet to a specific internal server except for HTTPS, while still allowing outbound web access for all users. What should the administrator configure on the MX?

A firewall rule that allows inbound HTTPS to the server and denies all other inbound traffic.

A VLAN configuration that places the server on a separate subnet.

An IPS rule that blocks all inbound traffic except HTTPS.

A traffic shaping rule that prioritizes HTTPS and drops all other inbound traffic.

In the Meraki dashboard, where would you configure QoS policies to prioritize voice traffic on a switch?

Switch > Configure > Quality of Service

Switch > Configure > Access policies

What is the primary purpose of Network Access Control (NAC)?

To prioritize traffic for real-time applications

To monitor network performance and alert on issues

To authenticate and authorize devices before granting network access

To provide wireless encryption for all devices

CiscoMeraki Solutions Specialist (ECMS)

Domain 2Objective 5

2.5 Design Enterprise Network Services 500-220 Practice Questions (Page 2)

Part of the Design domain, which accounts for 30% of the 500-220 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~11–18 in this domain), expect 2–3 from this objective — we provide 37 practice questions to prepare you well beyond it. (estimate)

37questions here

8free pages

10concepts

30%of the exam

Questions 6–10

6application · medium
A company's network administrator notices that the switch's MAC address table is full, causing the switch to flood traffic to all ports. This is likely the result of which type of attack?
Select an answer first
7expert · hard
A company is designing a network with two Meraki MS switches and wants to ensure high availability for a critical server that has two NICs. The server will be connected to both switches. The administrator wants to avoid a loop and ensure that if one switch fails, the server can still communicate. What should the administrator configure?
Select an answer first
8application · medium
A manufacturing company has a Meraki MX at the internet edge. The security team wants to block all inbound traffic from the internet to a specific internal server except for HTTPS, while still allowing outbound web access for all users. What should the administrator configure on the MX?
Select an answer first
9foundation · easy
In the Meraki dashboard, where would you configure QoS policies to prioritize voice traffic on a switch?
Select an answer first
10foundation · easy
What is the primary purpose of Network Access Control (NAC)?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 500-220

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “500-220” is a trademark of its owner, used for identification only.

2.5 Design Enterprise Network Services 500-220 Practice Questions (Page 2)

Questions 6–10

A company's network administrator notices that the switch's MAC address table is full, causing the switch to flood traffic to all ports. This is likely the result of which type of attack?

A manufacturing company has a Meraki MX at the internet edge. The security team wants to block all inbound traffic from the internet to a specific internal server except for HTTPS, while still allowing outbound web access for all users. What should the administrator configure on the MX?

In the Meraki dashboard, where would you configure QoS policies to prioritize voice traffic on a switch?

What is the primary purpose of Network Access Control (NAC)?

Keep studying — Design