CiscoCertified Network Professional Data Center
Domain 1Objective 1
1.1 Apply Routing Protocols 350-601 Practice Questions (Page 5)
Part of the Network domain, which accounts for 25% of the 350-601 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 1–2 from this objective — we provide 23 practice questions to prepare you well beyond it. (estimate)
23questions here
5free pages
9concepts
25%of the exam
Questions 21–23
- 21
Which BGP path attribute is considered well-known mandatory and is used to prevent routing loops?
Select an answer first - 22
A data center is migrating from OSPFv2 to OSPFv3. The engineer has configured OSPFv3 on all routers and interfaces. However, the OSPFv3 adjacencies are not forming. The engineer has verified that IPv6 addresses are configured correctly and that the interfaces are up. What is the most likely cause of the adjacency failure?
Select an answer first - 23
A data center network uses PIM sparse mode for multicast. The engineer has configured a static rendezvous point (RP) on all routers for the multicast group 239.1.1.0/24. However, multicast receivers are not receiving traffic. The source is sending traffic, and the first-hop router (FHR) is receiving the multicast packets. What is the most likely reason the receivers are not getting the traffic?
Select an answer first
Finished these 3 questions?
Review the revealed explanations, or continue through the curriculum.
No more pagesBack to 350-601
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-601” is a trademark of its owner, used for identification only.