A network engineer is using NETCONF to retrieve the configured IP address of an interface. The engineer knows the YANG model path for the interface. Which NETCONF operation and filter should be used to retrieve only the IP address?

get-config with a filter specifying the interface IP address leaf

edit-config with a filter specifying the interface IP address leaf

get with a filter specifying the interface IP address leaf

copy-config with a filter specifying the interface IP address leaf

A NETCONF client receives an 'authentication failed' error. What is the most likely cause?

The device does not support NETCONF.

The YANG model is not installed on the device.

Incorrect username or password for the SSH connection.

The NETCONF port is blocked by a firewall.

In RESTCONF, what does the HTTP status code 200 indicate?

The request was successful and the response contains data.

The resource was created successfully.

The server encountered an error.

CiscoCertified Network Professional Enterprise

Domain 4Objective 6

4.6 Configure and Verify NETCONF and RESTCONF 350-401 Practice Questions (Page 3)

Part of the 4.0 Network Assurance domain, which accounts for 10% of the 350-401 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 43 practice questions to prepare you well beyond it. (estimate)

43questions here

9free pages

11concepts

10%of the exam

Questions 11–15

11application · medium
A network engineer is troubleshooting a NETCONF session that is stuck because another session holds a lock on the running configuration. The engineer needs to forcefully terminate the other session to release the lock. Which NETCONF operation should be used?
Select an answer first
12foundation · easy
Which data encoding formats are supported by RESTCONF?
Select an answer first
13application · medium
A network engineer is using NETCONF to retrieve the configured IP address of an interface. The engineer knows the YANG model path for the interface. Which NETCONF operation and filter should be used to retrieve only the IP address?
Select an answer first
14foundation · easy
A NETCONF client receives an 'authentication failed' error. What is the most likely cause?
Select an answer first
15foundation · easy
In RESTCONF, what does the HTTP status code 200 indicate?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-401

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-401” is a trademark of its owner, used for identification only.

4.6 Configure and Verify NETCONF and RESTCONF 350-401 Practice Questions (Page 3)

Questions 11–15

A network engineer is troubleshooting a NETCONF session that is stuck because another session holds a lock on the running configuration. The engineer needs to forcefully terminate the other session to release the lock. Which NETCONF operation should be used?

Which data encoding formats are supported by RESTCONF?

A network engineer is using NETCONF to retrieve the configured IP address of an interface. The engineer knows the YANG model path for the interface. Which NETCONF operation and filter should be used to retrieve only the IP address?

A NETCONF client receives an 'authentication failed' error. What is the most likely cause?

In RESTCONF, what does the HTTP status code 200 indicate?

Keep studying — 4.0 Network Assurance