A network engineer notices that no flow data is being received by the collector, even though the flow monitor is active on the interface. The engineer checks the flow exporter configuration and sees the following: flow exporter EXPORTER-1 destination 192.0.2.50 transport udp 9995 What is the most likely cause of the issue?

The flow exporter is using TCP instead of UDP.

The flow record does not include the destination port.

The flow monitor is applied to the wrong interface.

The collector is listening on a different UDP port than 9995.

A network engineer is designing Flexible NetFlow for a campus core router. They need to collect traffic statistics for both IPv4 and IPv6 traffic, but the collector only supports one exporter. What is the most efficient configuration approach?

Create two flow exporters, one for IPv4 and one for IPv6, and apply them to the same monitor.

Use a single flow record with only interface and protocol keys, which works for both IPv4 and IPv6.

Create two flow records, one for IPv4 and one for IPv6, and two flow monitors, each referencing the appropriate record and the same exporter.

Create a single flow record that includes both IPv4 and IPv6 keys, and apply it to the interface.

CiscoCertified Network Professional Enterprise

Domain 4Objective 2

4.2 Configure and Verify Flexible NetFlow 350-401 Practice Questions (Page 1)

Part of the 4.0 Network Assurance domain, which accounts for 10% of the 350-401 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

7concepts

10%of the exam

Questions 1–5

1application · medium
A network engineer notices that no flow data is being received by the collector, even though the flow monitor is active on the interface. The engineer checks the flow exporter configuration and sees the following: flow exporter EXPORTER-1 destination 192.0.2.50 transport udp 9995 What is the most likely cause of the issue?
Select an answer first
2foundation · easy
Which show command displays the status of a flow monitor, including whether it is active and the number of flows in the cache?
Select an answer first
3application · medium
A network engineer is designing Flexible NetFlow for a campus core router. They need to collect traffic statistics for both IPv4 and IPv6 traffic, but the collector only supports one exporter. What is the most efficient configuration approach?
Select an answer first
4foundation · easy
In a flow record configuration, which command is used to define a field as a key (used to identify a flow)?
Select an answer first
5foundation · easy
Which transport protocol is typically used by a flow exporter to send Flexible NetFlow data to a collector?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-401

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-401” is a trademark of its owner, used for identification only.

4.2 Configure and Verify Flexible NetFlow 350-401 Practice Questions (Page 1)

Questions 1–5

Which show command displays the status of a flow monitor, including whether it is active and the number of flows in the cache?

A network engineer is designing Flexible NetFlow for a campus core router. They need to collect traffic statistics for both IPv4 and IPv6 traffic, but the collector only supports one exporter. What is the most efficient configuration approach?

In a flow record configuration, which command is used to define a field as a key (used to identify a flow)?

Which transport protocol is typically used by a flow exporter to send Flexible NetFlow data to a collector?

Keep studying — 4.0 Network Assurance