A router has a flow monitor applied to an interface, and 'show flow monitor cache' shows active flows. However, the NetFlow collector receives no data. The engineer verifies the exporter destination is reachable via ping. Which additional configuration detail should be checked?

Confirm the flow record includes the collector's IP address as a key.

Ensure the flow monitor is applied to both ingress and egress directions.

Check that the flow exporter is configured with a source interface that has an IP route to the collector.

Verify the flow exporter is using UDP port 9995, which matches the collector's listening port.

CiscoCertified Network Professional Enterprise

Domain 4Objective 2

4.2 Configure and Verify Flexible NetFlow 350-401 Practice Questions (Page 5)

Part of the 4.0 Network Assurance domain, which accounts for 10% of the 350-401 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

7concepts

10%of the exam

Questions 21–22

21expert · hard
A router has a flow monitor applied to an interface, and 'show flow monitor cache' shows active flows. However, the NetFlow collector receives no data. The engineer verifies the exporter destination is reachable via ping. Which additional configuration detail should be checked?
Select an answer first
22foundation · easy
Which command is used to enter the configuration mode for defining a new flow record in Cisco IOS?
Select an answer first

Finished these 2 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to 350-401

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-401” is a trademark of its owner, used for identification only.

4.2 Configure and Verify Flexible NetFlow 350-401 Practice Questions (Page 5)

Questions 21–22

A router has a flow monitor applied to an interface, and 'show flow monitor cache' shows active flows. However, the NetFlow collector receives no data. The engineer verifies the exporter destination is reachable via ping. Which additional configuration detail should be checked?

Which command is used to enter the configuration mode for defining a new flow record in Cisco IOS?

Keep studying — 4.0 Network Assurance