A network administrator needs to run an IP SLA operation every 5 minutes during business hours (8 AM to 6 PM) on weekdays to monitor a critical application. The operation should not run outside these hours to reduce unnecessary probe traffic. Which scheduling approach should be used?

Configure the operation with a frequency of 300 seconds and use the 'life' parameter to set the operation to run for 10 hours, then reschedule it manually each weekday.

Schedule the operation to start at 8 AM and end at 6 PM with a frequency of 300 seconds, and manually restart it each day.

Use a separate scheduling mechanism such as EEM (Embedded Event Manager) to start and stop the IP SLA operation at the required times.

Use the 'schedule' command with a start time of 8 AM and an end time of 6 PM, and set the frequency to 300 seconds; the operation will automatically run only during that window each day.

A dual-homed router uses a tracked static default route for failover. The IP SLA operation monitors a remote server's reachability. The engineer notices that the track flaps up and down intermittently, causing route instability. The operation is configured with a frequency of 5 seconds and a threshold of 100 ms. What is the most effective way to reduce flapping without changing the frequency?

Increase the IP SLA operation's timeout value.

Configure the track with a delay before changing state.

Use a different IP SLA operation type, such as UDP jitter.

Increase the IP SLA operation's threshold to 200 ms.

An engineer is configuring IP SLA to monitor a critical server from a branch router. The server is behind a firewall that only allows ICMP echo requests from the branch router's public IP address. The engineer wants to measure round-trip time and also verify that the server is responding. Which IP SLA operation type should be used, and what additional configuration is needed?

Use IP SLA ICMP echo with the source interface set to the router's public IP address.

Use IP SLA HTTP operation with the source interface set to the router's public IP address.

Use IP SLA UDP jitter with the source interface set to the router's public IP address.

Use IP SLA TCP connect to port 443 with the source interface set to the router's public IP address.

CiscoCertified Network Professional Enterprise

Domain 4Objective 4

4.4 Configure and Verify IPSLA 350-401 Practice Questions (Page 2)

Part of the 4.0 Network Assurance domain, which accounts for 10% of the 350-401 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

5concepts

10%of the exam

Questions 6–10

6application · medium
A network administrator needs to run an IP SLA operation every 5 minutes during business hours (8 AM to 6 PM) on weekdays to monitor a critical application. The operation should not run outside these hours to reduce unnecessary probe traffic. Which scheduling approach should be used?
Select an answer first
7expert · hard
A dual-homed router uses a tracked static default route for failover. The IP SLA operation monitors a remote server's reachability. The engineer notices that the track flaps up and down intermittently, causing route instability. The operation is configured with a frequency of 5 seconds and a threshold of 100 ms. What is the most effective way to reduce flapping without changing the frequency?
Select an answer first
8foundation · easy
Which command displays the status and latest results of all configured IP SLA operations?
Select an answer first
9application · medium
An engineer has configured an IP SLA operation to monitor a critical server. After scheduling, the operation does not appear in the 'show ip sla statistics' output. Which command should the engineer use to verify that the operation is actually scheduled?
Select an answer first
10expert · hard
An engineer is configuring IP SLA to monitor a critical server from a branch router. The server is behind a firewall that only allows ICMP echo requests from the branch router's public IP address. The engineer wants to measure round-trip time and also verify that the server is responding. Which IP SLA operation type should be used, and what additional configuration is needed?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-401

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-401” is a trademark of its owner, used for identification only.

4.4 Configure and Verify IPSLA 350-401 Practice Questions (Page 2)

Questions 6–10

A network administrator needs to run an IP SLA operation every 5 minutes during business hours (8 AM to 6 PM) on weekdays to monitor a critical application. The operation should not run outside these hours to reduce unnecessary probe traffic. Which scheduling approach should be used?

Which command displays the status and latest results of all configured IP SLA operations?

An engineer has configured an IP SLA operation to monitor a critical server. After scheduling, the operation does not appear in the 'show ip sla statistics' output. Which command should the engineer use to verify that the operation is actually scheduled?

Keep studying — 4.0 Network Assurance