1.3 Implement Office Extend 300-430 Practice Questions (Page 4)

Questions 16–20

1. 16foundation · easy

   Which step is required when configuring an Office Extend AP to ensure it can join the WLC from a remote location?

   • AConfigure the AP with a static IP address and DNS name for the WLC
   • BConfigure the home router to use a static route to the WLC
   • CDisable all security features on the WLC
   • DSet the AP to local mode
   Reveal Solution Discussion Select an answer first
2. 17expert · hard

   A network administrator is troubleshooting an Office Extend AP that is not joining the WLC. The AP is powered on and the LED is blinking red. The AP is configured with the WLC's public IP address. What is the most likely cause?

   • AThe AP's DTLS certificate is expired.
   • BThe home router is blocking UDP port 5246.
   • CThe WLC is configured with the wrong AP policy.
   • DThe AP is configured with the wrong SSID name.
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   An Office Extend AP is not joining the WLC. Which command on the WLC would you use to verify whether the AP is attempting to join?

   • Ashow ap statistics
   • Bshow ap join summary
   • Cshow ap inventory
   • Dshow ap config general
   Reveal Solution Discussion Select an answer first
5. 19foundation · easy

   A remote user reports that the Office Extend SSID is not visible. What is a common cause for this issue?

   • AThe client device is not compatible with WPA3
   • BThe AP is not connected to the internet
   • CThe WLC has disabled the SSID for all APs
   • DThe home router is blocking the 2.4 GHz band
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   An Office Extend AP is deployed at a remote employee's home. The AP is registered to the WLC, but the employee cannot access any corporate resources. The employee can connect to the SSID and obtain an IP address. What is the most likely cause?

   • AThe client's home router is blocking the corporate DNS server.
   • BThe CAPWAP tunnel is down because the home router is blocking UDP port 5246.
   • CThe AP is in FlexConnect mode with local switching enabled.
   • DThe WLAN is configured with the wrong SSID name.
   Reveal Solution Discussion Select an answer first