1.2 Deploy FlexConnect Capabilities 300-430 Practice Questions (Page 5)

Questions 21–25

1. 21foundation · easy

   What is the main benefit of the Smart AP image upgrade feature for FlexConnect APs?

   • AIt allows APs to upgrade their software without any downtime.
   • BIt allows APs to run multiple software versions simultaneously for testing.
   • CIt reduces WAN bandwidth usage by allowing APs to download the image from a local source or peer APs.
   • DIt enables APs to upgrade their image automatically without any administrator intervention.
   Reveal Solution Discussion Select an answer first
2. 22foundation · easy

   What is the purpose of configuring VLAN-based central switching on a FlexConnect AP?

   • ATo prioritize traffic for certain VLANs over others
   • BTo enable the AP to connect to multiple controllers for redundancy
   • CTo allow the AP to use a different SSID for each VLAN
   • DTo tunnel traffic for specific VLANs to the controller while other VLANs are switched locally
   Reveal Solution Discussion Select an answer first
4. 23foundation · easy

   Which statement accurately describes how FlexConnect groups affect client roaming?

   • AFlexConnect groups allow clients to roam between APs in different groups without any controller involvement.
   • BClients can roam between any APs in the same controller, regardless of FlexConnect group membership, as long as the APs are on the same subnet.
   • CFlexConnect groups are used only to group APs for firmware upgrades and do not affect client roaming.
   • DClients can roam only between APs that are in the same FlexConnect group, and the group must be configured with the same SSID and security settings.
   Reveal Solution Discussion Select an answer first
5. 24foundation · medium

   A network engineer is troubleshooting a FlexConnect deployment where a client roams between two FlexConnect APs that are in different FlexConnect groups but both are in connected mode. The client maintains its IP address during the roam. Which statement describes the role of the controller in this roaming scenario?

   • AThe controller is not involved in the roam because the client's IP address is maintained, so the APs can complete the roam entirely without controller interaction.
   • BThe controller must process the client's authentication and update the mobility database, but the data traffic continues to be switched locally at the new AP.
   • CThe controller must bridge the client's data traffic between the two APs because the client's IP address is maintained across the roam.
   • DThe controller must centralize the client's traffic after the roam because the client moved to a different FlexConnect group, requiring central switching.
   Reveal Solution Discussion Select an answer first
6. 25foundation · easy

   What is the primary purpose of a FlexConnect group in a Cisco wireless deployment?

   • ATo provide a backup WAN link for FlexConnect APs when the primary link to the controller fails
   • BTo group multiple access points so they share a common configuration and support client roaming among them
   • CTo enable the controller to manage APs across different routing domains using a single management IP address
   • DTo define a set of VLANs that are mapped to specific SSIDs for local switching
   Reveal Solution Discussion Select an answer first