A VDS with four 1GbE uplinks is experiencing high latency and packet loss for VMs on a single host. The physical switch ports are configured as a static EtherChannel. The VDS teaming policy is 'Route based on IP hash'. The administrator has verified that the physical switch configuration is correct. What should the administrator check next?

Review the VDS health check status for the teaming policy.

Check the VDS MTU configuration.

Change the teaming policy to 'Route based on physical NIC load'.

Verify that the VDS uplinks are connected to the correct physical switch ports in the EtherChannel.

During a VDS migration, which factor is most important to verify before moving a host to a new distributed switch?

The host's storage configuration

The host's ESXi version compatibility with the VDS

A VM on a vSphere Distributed Switch cannot communicate with the network. Which check should be performed FIRST to isolate the issue?

Verify the VM's IP address configuration

Check the uplink status on the distributed switch

Which vSphere feature provides a health check to validate the configuration of a vSphere Distributed Switch?

Distributed Switch Health Check

An administrator is migrating a host from a standard vSwitch to a VDS. The migration fails with an error indicating that the host is not compatible with the VDS. The host is running ESXi 7.0, and the VDS is version 7.0. What should the administrator do to resolve the compatibility issue?

Upgrade the VDS to a higher version.

Check the VDS health check status for the host.

Check the VDS version and the host's ESXi version for compatibility.

Upgrade the host to a newer version of ESXi.

VMwareVCP-VCF Support (2V0-15.25)

Domain 8Objective 1

Given a Scenario, Troubleshoot Issues with vSphere Distributed Switches (VDS) VCP-VCF-SUPPORT Practice Questions (Page 3)

Part of the Troubleshooting a VCF Fleet - Networking domain, which makes up ~14% of our current practice bank.

20questions here

4free pages

7concepts

Questions 11–15

11expert · hard
A VDS with four 1GbE uplinks is experiencing high latency and packet loss for VMs on a single host. The physical switch ports are configured as a static EtherChannel. The VDS teaming policy is 'Route based on IP hash'. The administrator has verified that the physical switch configuration is correct. What should the administrator check next?
Select an answer first
12foundation · easy
During a VDS migration, which factor is most important to verify before moving a host to a new distributed switch?
Select an answer first
13foundation · easy
A VM on a vSphere Distributed Switch cannot communicate with the network. Which check should be performed FIRST to isolate the issue?
Select an answer first
14foundation · easy
Which vSphere feature provides a health check to validate the configuration of a vSphere Distributed Switch?
Select an answer first
15expert · hard
An administrator is migrating a host from a standard vSwitch to a VDS. The migration fails with an error indicating that the host is not compatible with the VDS. The host is running ESXi 7.0, and the VDS is version 7.0. What should the administrator do to resolve the compatibility issue?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VCP-VCF-SUPPORT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by VMware. “VCP-VCF-SUPPORT” is a trademark of its owner, used for identification only.