If a VCF bring-up fails after SDDC Manager has been deployed but before vCenter Server is fully configured, what is the safest recovery approach?

Rerun the bring-up process after cleaning up partially deployed components

Delete the SDDC Manager VM and start over

Reboot the SDDC Manager appliance and retry

Manually configure vCenter Server and continue

What is the primary purpose of the VCF bring-up phase?

To deploy and configure the management domain components

To roll back a failed deployment

To validate DNS and NTP configuration

To create workload domains for running production applications

A VCF workload domain creation fails because the vCenter Server for the workload domain cannot communicate with the ESXi hosts. The administrator has confirmed that the hosts are reachable via ping. What should the administrator check next?

The DNS records for the vCenter Server.

The NTP configuration on the vCenter Server.

The ESXi host firewall settings to ensure that the required ports are open.

The storage configuration on the ESXi hosts.

A VCF management domain bring-up fails during the 'Configure vCenter Server' step with an SSL certificate error. The administrator has verified that the certificate is valid, trusted, and has the correct SAN. The NTP settings are correct. What should the administrator check next?

The ESXi host firewall settings.

The DNS records for the vCenter Server.

The certificate chain, including intermediate certificates, is properly installed on the vCenter Server.

The storage configuration on the ESXi hosts.

VMwareVCP-VCF Support (2V0-15.25)

Domain 1Objective 1

Given a Scenario, Troubleshoot Issues with the Initial VCF Deployment Process VCP-VCF-SUPPORT Practice Questions (Page 4)

Part of the Troubleshooting the Deployment of VCF - VCF Fleet domain, which makes up ~5% of our current practice bank.

22questions here

5free pages

6concepts

Questions 16–20

16foundation · easy
If a VCF bring-up fails after SDDC Manager has been deployed but before vCenter Server is fully configured, what is the safest recovery approach?
Select an answer first
17foundation · easy
What is the primary purpose of the VCF bring-up phase?
Select an answer first
18application · medium
A VCF workload domain creation fails because the vCenter Server for the workload domain cannot communicate with the ESXi hosts. The administrator has confirmed that the hosts are reachable via ping. What should the administrator check next?
Select an answer first
19foundation · easy
A VCF deployment fails because the management VLAN is not trunked to the ESXi hosts. Which category of common deployment failure does this represent?
Select an answer first
20expert · hard
A VCF management domain bring-up fails during the 'Configure vCenter Server' step with an SSL certificate error. The administrator has verified that the certificate is valid, trusted, and has the correct SAN. The NTP settings are correct. What should the administrator check next?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VCP-VCF-SUPPORT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by VMware. “VCP-VCF-SUPPORT” is a trademark of its owner, used for identification only.