Given a Scenario, Troubleshoot Issues with the Configuration of VCF Operations (including VCF Operations for Logs and Networks) VCP-VCF-SUPPORT Practice Questions (Page 3)

Questions 11–15

1. 11application · medium

   An administrator notices that VCF Operations for Logs is ingesting logs from ESXi hosts, but the logs are not being parsed into the expected fields (e.g., severity, source IP). The raw logs are visible in the search UI, but the structured fields are empty. What should the administrator check first?

   • AWhether the log storage tier is set to 'Hot' or 'Cold'
   • BWhether the log collector is receiving logs over TCP or UDP
   • CWhether the ESXi hosts are configured with the correct syslog port
   • DWhether the correct content pack is installed and applied to the ESXi log source
   Reveal Solution Discussion Select an answer first
2. 12application · medium

   A VCF administrator is troubleshooting VCF Operations for Networks and notices that the 'Network Discovery' job is failing with an error related to SNMP. The NSX-T integration is healthy, and flow data is being collected. What is the most likely cause of the SNMP discovery failure?

   • AThe NSX-T manager is not configured to forward SNMP traps
   • BThe network devices are not in the same subnet as the VCF Operations for Networks collector
   • CThe flow data collection is consuming all available bandwidth on the collector
   • DThe SNMP community string or credentials configured in VCF Operations for Networks do not match the network devices
   Reveal Solution Discussion Select an answer first
4. 13foundation · easy

   A VCF administrator is troubleshooting why VCF Operations for Logs is not receiving logs from a new log source. The source is configured correctly. Which step should the administrator take next to isolate the issue?

   • ARestart the log source service.
   • BDisable and re-enable the log source.
   • CIncrease the log retention period.
   • DTest connectivity from the log source to the VCF Operations for Logs server.
   Reveal Solution Discussion Select an answer first
5. 14expert · hard

   A VCF administrator is troubleshooting VCF Operations for Networks. The 'Network Topology' view is showing an incomplete map: some switches are missing, and the links between devices are not fully drawn. The SNMP discovery job completes successfully, and the NSX-T integration is healthy. What is the most likely cause of the incomplete topology?

   • AThe VCF Operations for Networks collector is in a different subnet than the switches
   • BThe SNMP credentials for the missing switches are incorrect or not configured
   • CThe flow data collection is interfering with SNMP discovery
   • DThe NSX-T manager is not configured to report network topology
   Reveal Solution Discussion Select an answer first
6. 15foundation · easy

   A VCF administrator notices that VCF Operations is not collecting metrics from a newly added vCenter Server. The vCenter Server appears in the inventory, but no data is being collected. Which configuration setting is most likely to be the cause?

   • AThe retention policy for the vCenter Server is set to '30 days'.
   • BThe data collection interval for the vCenter Server is set to 'Never'.
   • CThe vCenter Server's certificate is not trusted by VCF Operations.
   • DThe vCenter Server is in a different management domain.
   Reveal Solution Discussion Select an answer first