A conversion to VCF 9.0 fails with the error 'vCenter Server service is not running'. The administrator checks the vCenter Server and confirms that the service is running. What should the administrator do next?

Restart the vCenter Server service to ensure it is running.

Re-run the conversion wizard to see if the error persists.

Verify that the vCenter Server's database is healthy and that it has enough space.

Check the vCenter Server logs to see if there are any errors related to the conversion.

Which of the following indicates that a vSphere to VCF 9.0 conversion was successful?

The vSphere Client shows the VCF management domain as a new object.

The ESXi hosts are configured with the VCF-specific SSH keys.

The SDDC Manager UI shows the vCenter Server as a managed resource with a healthy status.

The vCenter Server is configured with the VCF license key.

During a vSphere to VCF 9.0 conversion, which error message indicates a common conversion failure symptom?

Error: The ESXi host is not responding to ICMP ping requests.

Error: The vCenter Server version is not supported for conversion.

Error: The vSphere environment has insufficient memory for the VCF management domain.

Error: Unable to connect to the vCenter Server because the certificate is expired.

What is the first step in rolling back a failed vSphere to VCF 9.0 conversion?

Restore the vCenter Server from a backup taken before the conversion.

Remove the VCF management domain from the SDDC Manager.

Disconnect the ESXi hosts from the vCenter Server.

Reinstall the ESXi hosts with the original vSphere configuration.

A vSphere to VCF 9.0 conversion fails because the ESXi hosts cannot communicate with the vCenter Server. Which network configuration issue is the most likely cause?

The vCenter Server is configured with a static IP address that is not in the same subnet as the ESXi hosts.

The ESXi hosts are configured with a hostname that is not in the DNS server.

The VLAN for the management network is not configured on the ESXi hosts.

The DNS server is not configured with a reverse lookup zone.

VMwareVCP-VCF Support (2V0-15.25)

Domain 2Objective 2

Given a Scenario, Troubleshoot a vSphere to VCF 9.0 Conversion VCP-VCF-SUPPORT Practice Questions (Page 3)

Part of the Troubleshooting the Deployment of VCF - VCF Upgrade and Conversion domain, which makes up ~5% of our current practice bank.

21questions here

5free pages

8concepts

Questions 11–15

11application · medium
A conversion to VCF 9.0 fails with the error 'vCenter Server service is not running'. The administrator checks the vCenter Server and confirms that the service is running. What should the administrator do next?
Select an answer first
12foundation · medium
Which of the following indicates that a vSphere to VCF 9.0 conversion was successful?
Select an answer first
13foundation · medium
During a vSphere to VCF 9.0 conversion, which error message indicates a common conversion failure symptom?
Select an answer first
14foundation · medium
What is the first step in rolling back a failed vSphere to VCF 9.0 conversion?
Select an answer first
15foundation · medium
A vSphere to VCF 9.0 conversion fails because the ESXi hosts cannot communicate with the vCenter Server. Which network configuration issue is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VCP-VCF-SUPPORT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by VMware. “VCP-VCF-SUPPORT” is a trademark of its owner, used for identification only.