An administrator has deployed an NSX Edge node and configured it as a transport node. They are now creating a Tier-1 gateway and attaching it to a Tier-0 gateway. The Tier-1 gateway needs to provide east-west routing for a new workload segment. What is the minimum set of configurations required on the Tier-1 gateway to enable this functionality?

Enable OSPF on the Tier-1 gateway and configure the workload segment as an OSPF interface.

Configure a BGP session on the Tier-1 gateway with the Tier-0 gateway as a neighbor, and enable route redistribution.

Configure a gateway interface on the Tier-1 gateway, connect it to the workload segment, and ensure the Tier-1 gateway is linked to the Tier-0 gateway.

Create a route map on the Tier-1 gateway to advertise the workload segment to the Tier-0 gateway, and apply it to the Tier-0 link.

An administrator creates a Tier-1 gateway and needs to provide north-south connectivity for workloads. What must be done to enable this connectivity?

Configure BGP on the Tier-1 gateway

Enable distributed firewall on the Tier-1 gateway

Create a logical switch and connect it to the Tier-1 gateway

Attach the Tier-1 gateway to a Tier-0 gateway

What is the primary purpose of route leaking between VRF Lite instances?

To provide DHCP services across VRFs

To combine all VRFs into a single routing table

To enable distributed firewall between VRFs

To selectively share routes between VRFs

An administrator has created a Tier-1 gateway and attached it to a Tier-0 gateway. The Tier-1 gateway needs to provide routing for a new segment. The segment is already created. What must be configured on the Tier-1 gateway to enable routing for this segment?

Create a gateway interface on the Tier-1 gateway and connect it to the segment.

Enable BGP on the Tier-1 gateway and advertise the segment.

Create a static route on the Tier-1 gateway pointing to the segment's subnet.

Attach the segment to the Tier-0 gateway.

An administrator is configuring OSPF on a Tier-0 gateway in NSX-T. The on-premises network uses OSPF area 0. The administrator needs to ensure that OSPF adjacencies are established with the on-premises router. What must be configured on the Tier-0 gateway?

Configure a BGP neighbor with the on-premises router's IP address.

Create a static route on the Tier-0 gateway pointing to the on-premises network.

Enable route redistribution from OSPF to BGP on the Tier-0 gateway.

Configure an OSPF area with the area ID 0 and add the uplink interface to that area.

VMwareCertified Professional – Network Virtualization (VCP-NV)

Domain 2Objective 2

Edge and Gateway Configuration VCP-NV Practice Questions (Page 1)

Part of the Install, Configure, Administrate the VMware Solution domain, which makes up ~44% of our current practice bank.

25questions here

5free pages

10concepts

Questions 1–5

1application · medium
An administrator has deployed an NSX Edge node and configured it as a transport node. They are now creating a Tier-1 gateway and attaching it to a Tier-0 gateway. The Tier-1 gateway needs to provide east-west routing for a new workload segment. What is the minimum set of configurations required on the Tier-1 gateway to enable this functionality?
Select an answer first
2foundation · easy
An administrator creates a Tier-1 gateway and needs to provide north-south connectivity for workloads. What must be done to enable this connectivity?
Select an answer first
3foundation · easy
What is the primary purpose of route leaking between VRF Lite instances?
Select an answer first
4application · medium
An administrator has created a Tier-1 gateway and attached it to a Tier-0 gateway. The Tier-1 gateway needs to provide routing for a new segment. The segment is already created. What must be configured on the Tier-1 gateway to enable routing for this segment?
Select an answer first
5application · medium
An administrator is configuring OSPF on a Tier-0 gateway in NSX-T. The on-premises network uses OSPF area 0. The administrator needs to ensure that OSPF adjacencies are established with the on-premises router. What must be configured on the Tier-0 gateway?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VCP-NV

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by VMware. “VCP-NV” is a trademark of its owner, used for identification only.