2.4 Explain Dynamic and Static Routing Protocol Tuning SD-WAN-ENGINEER Practice Questions (Page 4)

Questions 16–18

1. 16application · medium

   An SD-WAN edge is running OSPF with multiple routers. The administrator wants to ensure that a specific router is preferred for a particular subnet. Which OSPF parameter should be adjusted on that router?

   • AThe OSPF dead timer
   • BThe OSPF metric for the subnet
   • CThe OSPF area ID
   • DThe OSPF hello timer
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   An SD-WAN edge is running OSPF with a core router. The administrator wants to ensure that a specific route is preferred over another route to the same subnet. Which OSPF parameter should be adjusted?

   • AThe OSPF hello timer
   • BThe OSPF dead timer
   • CThe OSPF area ID
   • DThe OSPF metric on the route
   Reveal Solution Discussion Select an answer first
3. 18application · medium

   A branch site has a static default route pointing to the SD-WAN fabric. The administrator wants to ensure that if the fabric's next-hop becomes unreachable, the branch can still reach the internet via a local ISP router. Which configuration should be used?

   • AConfigure a floating static route to the ISP router with a higher administrative distance
   • BConfigure a second static route to the ISP router with a lower metric
   • CRedistribute the static default route into OSPF
   • DIncrease the administrative distance of the primary static route
   Reveal Solution Discussion Select an answer first