Tools Available to Review an Installation CERTIFIED-STORAGE-INSTALLATION-ENGINEER-ONTAP Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   Which NetApp tool can be used to review an ONTAP installation's configuration and receive proactive recommendations based on best practices?

   • AONTAP System Manager
   • BNetApp Hardware Universe
   • CONTAP CLI
   • DActive IQ
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   A NetApp engineer has completed an ONTAP installation and wants to use Active IQ to review the installation for potential configuration issues and best-practice recommendations. The engineer has access to the cluster's serial number and has verified network connectivity. What is the first step the engineer should take to access the installation review in Active IQ?

   • ADownload the Active IQ Unified Manager and install it on a local server
   • BEnable AutoSupport and wait for the first scheduled upload
   • CRun the `active-iq show` command on the cluster to generate a local report
   • DLog in to the Active IQ portal and register the cluster using its serial number
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   What is the primary purpose of using Active IQ to review an ONTAP installation?

   • ATo provide proactive recommendations and best-practice checks
   • BTo replace the need for ONTAP System Manager
   • CTo provide a command-line interface for the cluster
   • DTo perform real-time configuration changes
   Reveal Solution Discussion Select an answer first
5. 9expert · hard

   A field engineer is performing a final installation review for a customer. The engineer uses System Manager and sees that the cluster health is 'OK'. The engineer then uses the CLI to run `network interface show` and sees that the cluster management interface is 'up'. However, the engineer notices that the `system node show -fields health` output shows node2 as 'false'. What is the most appropriate next step for the engineer?

   • AProceed with the handoff because the cluster management interface is up
   • BReboot node2 to see if the health status changes
   • CCheck the Active IQ portal for recommendations
   • DInvestigate why node2 is unhealthy and resolve the issue
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A NetApp engineer is preparing to hand off a new cluster to a customer. The engineer wants to use Active IQ to generate a report that identifies any configuration deviations from NetApp best practices. What must be configured on the cluster to ensure Active IQ has the data needed to generate this report?

   • AA support contract must be active and the cluster must be registered in the Active IQ portal
   • BSNMP must be enabled and configured with a community string
   • CThe cluster must be registered with Active IQ Unified Manager
   • DAutoSupport must be enabled and configured to send data to NetApp
   Reveal Solution Discussion Select an answer first